USB-SC09-FX PLC Programming Cable

Description:
USB-SC09-FX is the programming cable in which USB interface provided both the serial connection and RS422 signal conversion. Under the control of the computer-driven driver, the programming cable makes it possible for the computer's USB interface to simulate the traditional serial (known as COM interface), thus various existing programming software such as communications software, monitoring software, and other applications can be normally used. The working power supply of this cable is directly from the USB port, but not the PLC programming interface. The two-color LED on the converter box indicates data’s transceiving status.
USB-SC09-FX is applicable to the FX series PLC which has the MD8F radio socket of Mitsubishi, such as FX2N/FX1N/FX0/FX0N/FX0S/FX1S/FX3U, and it can substitute the FX-232AW module. The largest communications distance is two kilometers.

Specifications:
Support USB-SC09-FX programming software version: FXGP / WIN V1.0, GPP V4.0, GX Developer V7.0 and above.
Fully compatible with USB V1.1 norms and USB CDC V1.1
USB-bus powered, with current consumption of 50 mA
Support UART data format: data bits: 7-8; stop bit: 1, 2; check-bit: odd / even / no parity
Support long-distance communications, the largest communications is two kilometers (9600 bps)
Each PC only supports one USB cable programming

Features:
Interface: USB , RS422
Baud rate: 300 bps ~ 1Mbps automatically adapt to the standard baud rate
Operating Temperature: -20°C ~ +75°C
Cable length: 2.5m
Color: black

Package Include:
1 x  PLC Programming Cable