2 PCS TP4056A Lithium Battery Type C USB Charger Module

2 PCS TP4056A Lithium Battery Type C USB Charger Module
Click image for Gallery
  • Product Code:SQ9255
  • Availability: 10000
  • $0.35
  • Ex Tax:$0.35
This product has a minimum quantity of 8

Tags: Lithium Battery Charger, 1A Charger, Power Adapter Module, Type C Charger, Charger Module, USB Charger, Tpye C USB

The TP4056 is a complete constant-current/constant-voltage linear charger for single cell lithium-ion batteries. Its SOP package and low external component count make the TP4056
ideally suited for portable applications. Furthermore, the TP4056 can work within USB and wall adapter.
No blocking diode is required due to the internal PMOSFET architecture and has prevented to negative Charge Current Circuit. Thermal feedback regulates the charge current to limit the die temperature during high power operation or high ambient temperature.
The charge voltage is fixed at 4.2V, and the charge current can be programmed externally with a single resistor. The TP4056 automatically terminates the charge cycle when the charge current drops to 1/10th the programmed value after the final float voltage is reached.
So If you are looking for a module using which you can safely use your Lithium battery for both charging it and for connecting it to your circuit then this module could be the right choice form you.
TP4056 Other features include current monitor, under-voltage lockout, automatic recharge and two status pin to indicate charge termination and the presence of an input voltage. 
The module operates with 5V which can be provided by the USB mini cable that is commonly used for charging smartphones.
The module does not support reverse polarity protection, so be very careful while connecting your battery.
Use a multimeter to check for the polarity of your battery, if connected in reverse your module will heat up immediately which would most likely kill it. 

Charging type: Linear
Current: 1A (Adjustable)
Charge precision: 1%. 
Input voltage: 4.5V ~ 5V
Full charge voltage: 4.2V
Interface: USB Type C
Battery discharge termination voltage: 2.5V
Battery over-current protection: 3A
Size: 28mm x 17mm

Package Include:
2 x TP4056A Lithium Battery Charger Type-C USB Module 

Electrical Parameters
Input Voltage 4.5V ~ 5V
Output Current 1A (Adjustable)
Board Parameters
Ports USB Type C
Physical Parameters
Size 28mm x 17mm

Write a review

Note: HTML is not translated!
   Bad           Good
Electronic & Robotic Supplier

Your B2B Supplying Partner in Mainland China

Worldwide Shipping

Using Vast Majority of International Couriers

Secure Payments

Always Pay with Trust by PayPal Express Checkout