STM485S RS232 to RS485 Serial Converter Module with DB9 Connectors and Passive Operation

STM485S RS232 to RS485 Serial Converter Module with DB9 Connectors and Passive Operation
Click image for Gallery
  • Product Code:SQ7595
  • Availability: 1000
  • $1.69
  •  
  • Ex Tax:$1.69
This product has a minimum quantity of 3
+
-


Tags: RS232 to RS485, STM485S, serial converter, DB9 adapter, passive converter, industrial serial, serial port converter

The STM485S is a compact and passive RS232 to RS485 converter module designed to bridge serial communication between legacy RS-232 ports and modern RS-485 industrial networks. Unlike active converters that require an external power supply, this serial port converter draws its operating power directly from the RS-232 handshake lines (RTS, DTR, and TXD) without initializing the interface, making it a convenient drop-in solution for systems where an extra power rail is unavailable. The RS-232 side uses a standard DB9 female connector, while the RS-485 side provides a DB9 male connector with an optional terminal board for screw-terminal wiring. The module supports asynchronous, half-duplex, differential transmission at data rates from 300bps to 115200bps, and it can extend the RS-485 communication distance up to 1200 meters over twisted-pair or shielded twisted-pair cable, compared with a maximum of 5 meters on the RS-232 side. This DB9 RS485 converter also supports multi-drop networks with up to 32 devices on the same RS-485 bus, which is suitable for industrial automation, access control systems, parking systems, banking terminals, and building management networks. The internal transceiver circuit automatically controls the direction of the data stream, so no manual handshake configuration is required. Whether you are integrating legacy equipment into a modern RS-485 network or extending the reach of a serial link beyond the limits of RS-232, this industrial serial converter offers a practical combination of passivity, compatibility, and long-distance reliability.

Application

  1. Industrial automation and PLC communication networks
  2. Access control and parking management systems
  3. Banking and self-service terminal networks
  4. Building management and HVAC control systems
  5. Legacy equipment integration with modern RS-485 buses
  6. Long-distance serial data links in factory and warehouse environments

Specifications

  1. Model: STM485S
  2. Interface standard: EIA/TIA RS-232C and RS-485
  3. RS-232 connector: DB9 female
  4. RS-485 connector: DB9 male with terminal board
  5. Working mode: asynchronous, half-duplex, differential transmission
  6. Data rate: 300bps to 115200bps
  7. Transmission distance (RS-485): up to 1200m
  8. Transmission distance (RS-232): up to 5m
  9. Maximum devices per RS-485 network: 32
  10. Power supply: passive, no external power required (power derived from RS-232 RTS, DTR, and TXD lines)
  11. Transmission media: twisted pair or shielded twisted pair (STP)
  12. Dimensions: 17mm × 37mm × 57mm (per primary listing); secondary sources report 95mm × 33mm × 17mm
  13. Weight: approximately 20g (per secondary source)
Interfaces
Interface Type RS232 , RS485
Electrical Parameters
Baudrate 300bps ~ 115200bps
Board Parameters
Ports DB9 (RS-232) , Male DB9 (RS-485)
Physical Parameters
Size 57mm x 37mm x 17mm
Environmental Conditions and Safety
Operating Temprature 2°C ~ 50°C
Operating humidity 5 ~ 95% RH

Write a review

Note: HTML is not translated!
   Bad           Good
Captcha
Electronic & Robotic Supplier

Your B2B Supplying Partner in Mainland China

Worldwide Shipping

Using Vast Majority of International Couriers

Secure Payments

Always Pay with Trust by PayPal Express Checkout