STM32F401CCU6 Development Board

STM32F401CCU6 Development Board
  • Product Code: SQ9172
  • Availability: In Stock
  • $4.90
  •  
  • Ex Tax: $4.90
This product has a minimum quantity of 2
+
-


Tags: ARM Cortex M4, 32 Bit STM, Development Board, STM32F4, ARM microcontroller, microcontroller, ARM programming

Descriptions:
The development board is basically a printed circuit board with circuitry and hardware on-board to facilitate experimentation with certain microcontrollers. These boards can save you from a lot of repetitive tasks.
This module is based on the STM32F401 that is a high-performance ARM Cortex -M4 32-bit RISC core, operating at a frequency of up to 84 MHz. The Cortex-M4 core features a Floating point unit (FPU) single precision which supports all ARM single-precision data-processing instructions and data types. It also implements a full set of DSP instructions and a memory protection unit (MPU) which enhances application security. The STM32F401 incorporates high-speed embedded memories (up to 256 Kbytes of Flash memory, up to 64 Kbytes of SRAM), and an extensive range of enhanced I/Os and peripherals connected to two APB buses, two AHB buses, and a 32-bit multi-AHB bus matrix.
All devices offer one 12-bit ADC, a low-power RTC, six general-purpose 16-bit timers including one PWM timer for motor control, two general-purpose 32-bit timers. They also feature standard and advanced communication interfaces like I2C, SPI, USART.
In the F401 series, the chip is the cheapest, even cheaper than some F1, and crushed F1 on the main frequency, Therefore, it is possible to provide a learning platform with a very high-cost performance for beginners.
So it is better to use a suitable development board with a ready interface and immediately start moving on with your project. These development boards can be used in multiple projects, so it is a one-time investment that will not hit your budget much.

Specifications:
VB can connect coin battery power supply
Onboard 32.768Khz crystal, and 25Mhz main crystal
Type-C programming port
V+/V- can connect external ADC reference voltage, default to power voltage.
B2 boot select pin is selectable for boot configuring or normal GPIO.
SW debug port
Reset buttons

Features:
Main Chip: STM32F401CCU6
Input Voltage: 3.3V, 5V
Flash: 256Kbytes
SRAM: 64Kbytes
ADC: 12 bit
Port: USB Type C
Interface: I2C, SPI, USART
Operating Temperature: -40°C ~ +125°C
Pin Number: 44 Pins
Size: 54mm x 20mm

Package Include:
1 x STM32F4 Development Board

Interfaces
Interface Type I2C, SPI, USART
Electrical Parameters
Input Voltage 3.3V , 5V
Board Parameters
ADC 12 bit
FLASH 256Kbytes
Main Chip STM32F401CCU6
Pin Count 44 Pins
SRAM 64Kbytes
Ports USB Type C
Physical Parameters
Size 54mm x 20mm
Environmental Conditions and Safety
Operating Temprature -40°C ~ +125°C

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha
Electronic & Robotic Supplier

Your B2B Supplying Partner in Mainland China

Worldwide Shipping

Using Vast Majority of International Couriers

Secure Payments

Always Pay with Trust by PayPal Express Checkout