ST7735S Full Color TFT Display [1.8 inch] [128x160 Pixel]

Description:
ST7735S Full Color TFT Display Board is 1.8 inches with a resolution of the 128x160 (8 bit RGB) pixel, full-color TFT display, which is controlled by ST7735S display driver chip. The TFT Display interfaces and communicates with the microcontroller over SPI, so while using it, it must be connected to the SPI pins of the Arduino. TFT display can be supplied with logical voltage (3.3V) and 5V, but it can't directly connect to 5V,  before that, it must be applied a voltage regulator, otherwise, the display may be damaged. Some TFT display module has a built-in voltage regulator and can be connected directly to the 5V. If the display does not have a voltage regulator, it can be used any logic level converter between the display and the Arduino.
This module is equipped with an 18 pins flat cable. It displays up to 65,000 different colors with 8 bit RGB. It can directly be added to Arduino Mega or Uno, through the SPI interface. Its product specifications, driver IC data sheets, driver codes, STM32 routines, 51 routines, interface package, and other necessary technical support, needing for developing it can be provided. 

Features:
Size: 1.8 inch
Driver IC: ST7735S
Resolution: 128 x 160
Interface: SPI
Pin number: 18pin
Pitch: 0.8mm
Dimension: 34mm x 48.7mm

PIN definition:
1 GND
2 LED-K
3 LED-A
4 GND
5 RST
6 D/C
7 DIN
8 CLK
9-10 VCC
11 CS
12 GND
13-16 NC
17-18 GND

Package Include:
1 x 1.8 inch Full-Color TFT Display