ST7735R Full Color TFT Display Module [1.8 inch] [128x160 Pixel]

Description:
The ST7735R full color TFT display module is an SPI protocol based display with a resolution of 128*160 pixels and 1.8 inch size. It displays up to 262,144 different colors. The module has its own pixel-addressable frame buffer which means it can be used with all kinds of microcontroller with only 4 i/o pins. This module also comes by an SD card slot on which colored bitmaps can be loaded and easily displayed on the screen.
The TFT Display communicates with the microcontroller over SPI protocol, so you need to connect it to the SPI pins of the Arduino. Before connecting it directly to the 5v logic level of the Arduino, ensure that has a voltage regulator. Because the display may be destroyed if the version of the display you have does not have the regulator. If the display does not have a voltage regulator, you can use any logic level converter between the display and the Arduino.

Features:
Type: TFT
Driver IC: ST7735R
Input Voltage: 5V
Color: Full Color
Screen Size: 1.8 inch
Resolution: 128x160 Pixel
Interface: SPI
PCB Size: 46mm x 50mm
Can help you to get rid of the Arduino serial monitor.
Some tests and provide UTFT library, AdaFruit Library, and instruction on DropBox.

IO Interface:
1. RESET --directly to the microcontroller IO
2. CS --directly to the microcontroller IO
3. A0 --IO control registers select
4. SDA --IO control data transmission
5. SCL --IO control SPI bus
6. BL-- High-Level 3.3V backlight on

Package Include:
1 x 1.8 Inch TFT Module