SP3232 TTL to RS232 Converter Module with DB9 Male Connector and ESD Protection

SP3232 TTL to RS232 Converter Module with DB9 Male Connector and ESD Protection
Click image for Gallery
  • Product Code:SQ3591
  • Availability: 1000
  • $1.99
  •  
  • Ex Tax:$1.99
This product has a minimum quantity of 3
+
-


Tags: SP3232, TTL to RS232, RS232 converter, DB9 adapter, serial module, level converter, ttl converter module

The SP3232 TTL to RS232 converter module is a compact serial interface adapter designed to bridge 3V to 5.5V TTL logic levels with standard RS232 voltage levels for reliable communication between microcontrollers and PC serial ports. The module is built around the SP3232 transceiver IC, which integrates two transmitters and two receivers (2T/2R) and uses an internal charge pump to generate ±10V to ±12V RS232 output levels without requiring a separate power supply for the RS232 side. This RS232 to TTL converter supports data rates up to 250kbps and exposes RTS and CTS control lines, making it suitable for hardware flow control in industrial and laboratory equipment. The DB9 male connector provides a direct interface to standard PC COM ports, while the TTL side offers clearly labeled pins for VCC, GND, RXOUT, TXIN, CTS, and RTS. Built-in electrostatic discharge (ESD) protection helps safeguard the transceiver against handling and connection transients. This TTL serial level converter operates from a single 3V to 5.5V supply, which means it can be powered from the same rail as common microcontrollers such as Arduino, STM32, ESP32, and Raspberry Pi. Typical applications include connecting microcontroller boards to legacy RS232 devices, programming and debugging serial modules, and converting voltage levels for industrial serial equipment. Whether you need a DB9 male serial adapter for a benchtop instrument or a compact RS232 interface module for a field installation, this SP3232 charge pump module offers a practical combination of wide supply range, flow control support, and straightforward wiring.

Application

  1. Connecting Arduino, STM32, ESP32, and Raspberry Pi to PC RS232 ports
  2. Programming and debugging GSM, GPS, and RFID modules with RS232 interfaces
  3. Voltage level conversion for industrial equipment with legacy serial ports
  4. Laboratory and educational projects for learning serial communication protocols
  5. Hardware flow control setups using RTS and CTS lines
  6. Upgrading 5V TTL logic systems to standard RS232 signaling

Specifications

  1. Model: TTL-RS232-KV9
  2. Main IC: SP3232 (2 transmitters, 2 receivers)
  3. Supply voltage: 3V to 5.5V DC
  4. Data rate: up to 250kbps
  5. RS232 output voltage: ±10V to ±12V (generated by internal charge pump)
  6. ESD protection: built-in
  7. Control lines: RTS, CTS
  8. Connector: DB9 male
  9. TTL interface pins: VCC, GND, RXOUT, TXIN, CTS, RTS
  10. External power supply for RS232 side: not required
  11. Dimensions: not specified in the primary source; secondary sources report values ranging from 25×15mm to 51×16×3mm for similar modules
Interfaces
Interface Type RS232 , TTL
Electrical Parameters
Input Voltage 3V ~ 5.5V
Board Parameters
Main Chip SP3232
Pin Count 6 Pins
Ports Male DB9
Physical Parameters
Size 25mm x 15mm

Write a review

Note: HTML is not translated!
   Bad           Good
Captcha
Electronic & Robotic Supplier

Your B2B Supplying Partner in Mainland China

Worldwide Shipping

Using Vast Majority of International Couriers

Secure Payments

Always Pay with Trust by PayPal Express Checkout