5 PCS Mini Dual BEC Synchronous Power Hub [5V,12V]

5 PCS Mini Dual BEC Synchronous Power Hub [5V,12V]
  • Brands Matek System
  • Product Code:SQ6368
  • Availability: In Stock
  • $12.30
  •  
  • Ex Tax:$12.30
This product has a minimum quantity of 3
+
-


Tags: Power Distribution, Power HUB, Mini HUB, FPV Copter, Dual BEC

Description:    
5 PCS Mini Dual BEC Synchronous Power Hub [5V,12V] w-BEC [5V,12V] package contains 5 board of a high performance and high reliable mini power distributor from a power supply with 9V up to  26V DC to the four regulated  (a double synchronized) output voltage of BEC 5V and 12V DC, with LED power indicator. It can produce output voltages with 20A continuous current or 25A maximum current at 10 seconds per each minute. This HUB board is idealized for FPV Multicopter. In the FPV Multicopter, it is supplied with batteries range from 3S to 6S LiPo (recommended 4S to 6S batteries) and supplies cameras, servos, video transmitters, LEDs, etc. It can be supplied with 3S batteries, but the BEC12V output is not stable, about 1 to 2V under desired voltage, because cannot properly be regulated, which may be heard an inductive sound, too. This HUB can conveniently solder bridge of different voltage to supply camera & video transmitter.
While working with this HUB, the proper polarity (avoiding reverse connection) and avoiding short-circuiting is necessary. VCC output can be used for supplying more devices such as a camera.

Features:
Band name: Matek
Size: 36mm x 36mm
Mounting holes 30.5mm square spacing
4-layers PCB.
ESC & Battery solder tabs in pairs.
Solder Bridges of various voltage for Camera & VTX.
DC/DC synchronous buck regulator, Efficiency is up to 95%.
TVS(Transient Voltage Suppressor) protection for DC/DC chip.
5V & 12V Output
LED indicators & Short circuit tolerant.

General:
Input voltage range (2S-6S operation): 7.2 - 26VDC
Regulated 5V and 12V outputs
LED power indicators ( 5V & 12V outputs )
4 ESC outputs

ESC outputs:
Continuous current: 20A per output
Peak current (10 seconds/minute): 25A per output

BEC 5V output:
Designed for RC Receivers, Flight controllers, OSD, and Servos.
Voltage: 5.0 +/- 0.1VDC
Continuous current: 3 Ampers               
Short-circuit tolerant (10 seconds/minute)
The LED (indicates voltage is in regulation, within 10%)

BEC 12V output:
The battery should be 4S~6S LiPo
Standard output designed to power cameras and video transmitters, etc.
Voltage: 12.0 +/- 0.2VDC
Continuous current: 2 Amps (Max.3A 10s/minute)
Short-circuit tolerant (10 seconds/minute)
The LED (indicates voltage is in regulation, within 10%)

CAM & VTX voltage bridge
3S operation. choose “VCC” for 12V camera & 12V VTX,  VCC=Battery Voltage.
The 4~6S operation, choose “12” for 12V camera & 12V VTX
The 3~6S operation, choose “5” for 5V camera
Video pass-through from the “CAM” pad to the “VTX” pad

Notes:
Do not touch the carbon fiber board behind the board.

Package Include:
5 x Matek Mini Power Distribution Board

Electrical Parameters
Input Voltage 7.2 To 26VDC
Output Current 20A (Continuous current)
Output Voltage 5V , 12V
Physical Parameters
Size 36mm x 36mm

Write a review

Note: HTML is not translated!
   Bad           Good
Captcha
Electronic & Robotic Supplier

Your B2B Supplying Partner in Mainland China

Worldwide Shipping

Using Vast Majority of International Couriers

Secure Payments

Always Pay with Trust by PayPal Express Checkout