20 PCS PL2303HX USB To TTL Converter Module [5Pin]

20 PCS PL2303HX USB To TTL Converter Module [5Pin]
  • Product Code:SQ1044
  • Availability: In Stock
  • $8.50
  •  
  • Ex Tax:$8.50
+
-


Tags: PL2303HX, USB To TTL, TTL Adapter, USB Adapter, USB to Serial Converter

Description:
PL2303HX USB To Serial TTL Converter Module a small, economical, high performance, 5 pins USB male to TTL converter which is based on PL2303HX USB to serial bridge controller chip. The PL-2303HX (Chip Rev D) or PL-2303HXD chip can make easy connecting an RS-232 full-duplex asynchronous serial device to any USB    host port. The PL2303HX chip has a USB mass transfer mode, large data buffers, and self flows control, which can achieve higher performance (the baud rate more than 115200) than typical UART ports. It has a very flexible baud rate from 75 bps and 12M It has a high compatible driver, which enables it to simulate the traditional COM port and communicate perfectly with most operating systems, especially Windows XP / VISTA / 7 / 8 / 8.1. 
The PL2303HX chip is specialized for mobile and small applications, which can easily be embedded into any connectors and portable applications. It has a 500MA auto recovery protection fuse and consumes very little power while operating or suspending mode. So it is a perfect solution for bus-powered operation. It has two LED indicators to show the data transfer status, in real time.
This product is developed for laboratory, product test, repair and low-cost microcontroller communications, such as all kinds of satellites set-top box upgrade, Router, HDD, ADSL, broadband modem firmware upgrade or cracked upgrade, cell phone, XBOX360, GPS serial communication, vehicle inspection, and test, DVD flash and so on, Burn writes STC microcontroller, NXP microcontroller, Renesas microcontroller, NEC microcontroller and so on.

Features:
Type: USB to TTL
Model: PL2303
System Support: Windows XP / 2003 / win7 (32/64) / win8 (32/64) Vista (32/64) / Driver v6.6.1 / Linux Mac-OS, etc.
Operating Voltage: 4V ~ 5.25V
Output voltage: Dual voltage output (3.3V and 5V)
Output Interface: TXD, RXD, GND, 5V, 3.3V
Size: 50mm x 14mm

Package Include:
20 x PL2303 USB to TTL Converter Adapter

Electrical Parameters
Input Voltage Dual voltage output (3.3V and 5V)
Operating Voltage 4V - 5.25V
Output Voltage Dual voltage output (3.3V and 5V)
Board Parameters
Main Chip PL2303HX
Physical Parameters
Size 50mm x 14mm
Weight 6g

Write a review

Note: HTML is not translated!
   Bad           Good
Captcha
Electronic & Robotic Supplier

Your B2B Supplying Partner in Mainland China

Worldwide Shipping

Using Vast Majority of International Couriers

Secure Payments

Always Pay with Trust by PayPal Express Checkout