PICkit 3 Debugger and Programmer

PICkit 3 Debugger and Programmer
  • Product Code:SQ2029
  • Availability: In Stock
  • $20.10
  • Ex Tax:$20.10

Tags: PIC Programmer, Debugger, Programmer, PICkit


This is PICkit 3 development tools that have built-in drivers for high-speed USB communication.

PICkit3 is an online development and download development tool designed by Microchip for beginners to learn, evaluate, and develop PIC MCUs. PICkit 3.5 In-Circuit Debugger/Programmer is compatible with Microchip uses in-circuit debugging logic incorporated into each chip with Flash memory to provide a low-cost hardware debugger and programmer. The PICkit3.5 allows debugging and programming of PIC and dsPIC Flash microcontrollers using the powerful graphical user interface of the MPLAB Integrated Development Environment (IDE).

PICkit3.5 includes the advantages of more stable simulation, more models, and faster than PICkit2. It can support PIC16 PIC18 PIC24 DSPIC and other MCU simulation and download.

PICKit3 Compatible is used for programming the Microchip PIC10F, PIC12F, PIC16F, PIC18F, PIC24F, dsPIC30, dsPIC33 family with MPLAB X IDE and MPLAB IPE software. PICKit3 offers unprecedented level of performance, reliability and scalability for PIC programmer solution with ICSP (In-Circuit Serial Programming) method.

How to use the software:

  1. Connect PICkit3 to the ICSP connector and start the application.
  2. Now from the Device Family tab select the PIC18 and choose the Device from the dropdown menu.
  3. Load the hex file by going File->Import Hex.
  4. Then Use the Write button to burn the code to the PIC microcontroller.

Because the PIC's ICSP interface has only one row of 6PIN connectors, when you are going to connect the PICkit3 to the PIC target board, you should pay attention to the left and right direction of the connection.
In order to avoid burning the PICkit3 downloader, Do not insert it backward.

PICKit 3 programmer Application:

  1. 8-bit Devices - PIC10F/12F/16F
  2. 8-bit Devices - PIC18F
  3. 16-bit Devices
    dsPIC30F/33F, PIC24F/H
    32-bit Devices

PICKit 3 programmer Features:

Status of the PICkit3 LED:

  1. Power:
    Green, lights when power is on or connected to the target board.
  2. Active:
    Blue, lit when PICkit3 has established communication with the PC or sent/received a command.
  3. Status:
    Green, on when the debugger is operating normally (standby).
    ellow, lights up when the operation is busy.
    Red, lit when debugger fails.
  4. USB (Full speed 12 Mbits/s interface to host PC)
  5. Real-time execution
  6. MPLAB IDE compatible (free download from Microchip)
  7. Built-in over-voltage/short circuit monitor
  8. Firmware upgradeable from PC/web download
  9. Totally enclosed
  10. Diagnostic LEDs (power, busy, error)
  11. Read/write program and data memory of the microcontroller
  12. Erase of program memory space with verification
  13. Freeze-peripherals at breakpoint
  14. Program up to 512K byte flash with the Programmer-to-Go
  15. ICSP cable included
  16. Port: mini USB
  17. Input Voltage: 2V ~ 6V
  18. Pin Number: 6 Pins
  19. Pinout:

PICkit 3 debugger Items:

  1. 1 x PICKIT3.5 Microchip Programmer
  2. 1 x Mini USB Cable
  3. 1 x 6-Pin Flat Cable


  1. PICkit 3 debugger user guide Link
  2. PICkit 3 programmer download Link

Electrical Parameters
Input Voltage 2V ~ 6V
Board Parameters
Pin Count 6 Pins
Ports mini USB

Write a review

Note: HTML is not translated!
   Bad           Good
Electronic & Robotic Supplier

Your B2B Supplying Partner in Mainland China

Worldwide Shipping

Using Vast Majority of International Couriers

Secure Payments

Always Pay with Trust by PayPal Express Checkout