5mm Slot-Type Optocoupler Module with LM393 Comparator and ITR9606 Sensor

5mm Slot-Type Optocoupler Module with LM393 Comparator and ITR9606 Sensor
Click image for Gallery
  • Product Code:SQ9174
  • Availability: 1000
  • $0.25
  •  
  • Ex Tax:$0.25
This product has a minimum quantity of 20
+
-


Tags: optocoupler module, LM393 sensor, 5mm slot sensor, speed sensor, encoder module, ITR9606

This 5mm optocoupler module is a compact optical sensing board designed to convert physical interruptions in a narrow slot into clean digital pulses. The module pairs an ITR9606 infrared optocoupler with an LM393 comparator, so the raw analog signal from the phototransistor is conditioned into a sharp 0/1 logic output that microcontrollers can read directly. The 5mm slot width is well suited to encoder discs, slotted wheels, and mechanical flags, making this slot type optocoupler a practical choice for motor speed measurement, pulse counting, and position detection. Because the output is digital, the LM393 speed sensor eliminates the need for external analog-to-digital conversion and reduces the processing load on the host controller. The module operates from a 3.3V to 5V supply and can drive loads up to 15mA on the output pin, which is sufficient for direct connection to Arduino, ESP32, STM32, and similar microcontroller inputs. The PCB measures only 3.2cm by 1.4cm, so it fits easily into tight enclosures and small robotic platforms. A common use case is attaching an encoder disc to a DC motor shaft and counting the output pulses to calculate RPM or linear distance. The output can also be routed to an external interrupt pin so the controller responds immediately when the slot is blocked or cleared. For projects that require a reliable optical encoder module without complex analog tuning, this 5mm optocoupler module provides a straightforward and well-supported solution.

Application

  1. Motor RPM measurement with encoder discs
  2. Pulse counting for position and distance tracking
  3. Robot wheel speed monitoring and odometry
  4. Limit switch and end-stop detection in CNC and 3D printers
  5. Object counting on conveyor belts and production lines
  6. Optical tachometer and rotation detection projects

Specifications

  1. Model: 5mm-Optocoupler
  2. Operating voltage: 3.3V to 5V DC
  3. Output type: digital (DO), 0/1 logic levels
  4. Output drive current: up to 15mA
  5. Sensor: ITR9606 infrared optocoupler
  6. Comparator: LM393
  7. Slot width: 5mm
  8. PCB dimensions: 3.2cm × 1.4cm
  9. Interface: digital I/O pins for microcontroller connection
  10. Output behavior: low when slot is clear, high when slot is blocked
Sensor Parameters
Output Type Digital, Analog
Electrical Parameters
Input Voltage 3.3V ~ 5V
Board Parameters
Pin Count 4 Pins
Physical Parameters
Size 32mm x 14mm

Write a review

Note: HTML is not translated!
   Bad           Good
Captcha
Electronic & Robotic Supplier

Your B2B Supplying Partner in Mainland China

Worldwide Shipping

Using Vast Majority of International Couriers

Secure Payments

Always Pay with Trust by PayPal Express Checkout