NRF24L01 PA LNA Wireless Transceiver Module [2.4GHz]

NRF24L01 PA LNA Wireless Transceiver Module [2.4GHz]
Click image for Gallery
  • Product Code:SQ1191
  • Availability: 10000
  • $2.10
  •  
  • Ex Tax:$2.10
This product has a minimum quantity of 4
+
-


Tags: NRF24L01, Radio Transceiver, 2400MHz Transceiver, Wireless Transceiver, NRF24L01Plus, Arduino Transceiver

Description:
NRF24L01 PA LNA Wireless Transceiver Module is a 2.4GHz transceiver, which is based on nRF24L01+ chip. This chip is a highly integrated 2Mbps RF transceiver for the 2.4GHz ISM (Industrial, Scientific, and Medical) band. The  plus (+) version of the IC means that has improved range, sensitivity, and data rates than the older version. The module is designed as an economical transceiver just by the nRF24L01+ chip and a few external parts. 
It can be communicated with a microcontroller through the SPI and be configured with the microcontroller. This module integrates a complete RF transceiver, RF synthesizer, a power amplifier, a crystal oscillator, a demodulation, modulator and base band logic, including the Enhanced shockburst™ hardware protocol accelerator supporting a high-speed SPI interface for the application controller. The module is an ultra low power consumption, which results in months to years of battery lifetime, which is suitable for portable applications. This module has a built in power amplifier that extends the distance range up to 1100 meters. It is supplied with voltage from 1.9 to 3.6V, which is compatible with microcontroller and Arduino boards. So the module is very easy to develop.
In this module, a good trade off is done between wireless transition performance and cost. The module has a small external antenna (package included). Therefor with these properties, it can be used widely in digital devices such as mouse, keyboard, wireless headsets, intelligent sports equipment, remote controls, voice applications, security devices, VOIP applications.

Features:
IC: nRF24L01+
Frequency: 2.4GHz
Input voltage: 3V ~ 3.6V Max (recommended: 3.3V)
Maximum output power: +20dBm
Receive Sensitivity 2Mbps mode: -92dBm
Receive Sensitivity 1Mbps mode: -95dBm
Receive Sensitivity 250Kbps mode: -104dBm
TX mode current (peak): 115mA
RX mode current (peak): 45mA
Sleep mode current: 4.2uA
Data Rate: 2Mbps , 1Mbps , 250Kbps
PA Gain: 20dB
LNA Gain: 10dB
LNA noise figure: 2.6dB
Antenna Gain (peak): 2dBI
2Mbps transmission distance (open): 520m
Operating Temperature: -20°C ~ +70°C 
Size: 15.3mm x 40.8mm

Package Includes:
1 x NRF24L01+PA+LNA Wireless Transceiver Module
1 x SMA Antenna

Wireless Parameters
Data Rate 2Mbps , 1Mbps , 250Kbps
Receive sensitivity -92dBm in 2Mbps mode, -95dBm in 1Mbps mode, -104dBm in 250kbps mode
Output Power +20dBm (Max)
Transmission Distance 520m (Open)
Electrical Parameters
Frequency 2.4GHz
Input Voltage 3V ~ 3.6V
Input Voltage (recommended) 3.3V
Current 115mA(Transmiting mode) , 45mA(Receiving mode)
Board Parameters
Main Chip nRF24L01+
Physical Parameters
Operating Temperature -20°C ~ +70°C 
Size 15.3mm x 40.8mm

Write a review

Note: HTML is not translated!
   Bad           Good
Captcha
Electronic & Robotic Supplier

Your B2B Supplying Partner in Mainland China

Worldwide Shipping

Using Vast Majority of International Couriers

Secure Payments

Always Pay with Trust by PayPal Express Checkout