NanoPi M1 Plus

NanoPi M1 Plus
  • Product Code:SQ8842
  • Availability: In Stock
  • $47.00
  • Ex Tax:$47.00

Tags: NanoPi m1 plus, nanopi m2, nano pi m1 plus allwinner H3


The NanoPi M1 + or plus is designed and developed by FriendlyElec for professionals, enterprise users, makers, and hobbyists. It is only two thirds the size of a Raspberry Pi. FriendlyElec has made a Debian.
The M1 Plus uses the Allwinner H3 Soc. It integrates Gbps Ethernet, IR receiver, video/audio output, WiFi & Bluetooth-Compatible, onboard microphone and supports DVP/Camera/HDMI and CVBS. It has a serial debug port. Its GPIO pins are compatible with those of a Raspberry Pi.
Nanopi boards have different types such as nanopi m2, nanopi m3 and nanopi m4.

NanoPi M1 Plus Application:

  1. IR Controller
  2. play video
  3. electronic hobby
  4. maker

NanoPi M1 Plus Features:

  1. CPU: Allwinner H3, Quad-core Cortex-A7@1.2GHz
  2. GPU: Mali400MP2@600MHz,Supports OpenGL ES2.0
  3. RAM (DDR3): 1GB
  4. Flash: 8GB eMMC
  5. Wireless: 802.11 b/g/n
  6. Bluetooth: 4.0 Dual-mode
  7. Antenna Interface: Shared by WiFi and Bluetooth, IPX interface
  8. Connectivity: 10/100/1000M Ethernet
  9. Audio: 3.5mm jack/Via HDMI
  10. Microphone: onboard microphone
  11. IR: onboard IR receiver
  12. USB Host: USB 2.0 x 3, 2 x USB Type-A and 1 x 2.54mm pitch pin-header
  13. MicroSD Slot: x1
  14. MicroUSB: power input and data transmission, OTG
  15. Audio Output: HDMI 1.4 1080P, CVBS
  16. DVP Camera Interface: 24pin, 0.5mm pitch FPC seat
  17. Serial Debug Port: 4Pin, 2.54mm pitch pin-header
  18. GPIO: 40pin, 2.54mm pitch pin-header, compatible with raspberry pi 2's GPIO. It contains UART, SPI, I2C, I2S/PCM, SPDIF-OUT and IO
  19. User Button: 1 x Power Button and 1 x Reset Button
  20. LED: 1 x Power LED and 1 x System status LED
  21. Interface: UART, SPI, I2C
  22. Ports: 2x USB2.0, 1x Micro USB, 1x HDMI, 1 x Ethernet Port, 1 x Audio Jack, 1x Micro SD Slot
  23. Input Voltage: 5V
  24. Input Current: 2A
  25. OS/Software: u-boot, Debian, Ubuntu-Core, flasher, Android
  26. Operating Temperature: -30℃ ~ +80℃
  27. Size: 64mm x 60mm


  1. Nanopi m1 plus Allwinner H3 Link 
Interface Type UART, SPI, I2C
Electrical Parameters
Input Current 2A
Input Voltage 5V
Board Parameters
CPU Allwinner H3, Quad-core Cortex-A7@1.2GHz
GPU Mali400MP2@600MHz,Supports OpenGL ES2.0
OS u-boot, Debian, Ubuntu-Core, eflasher, Android
Communications WiFi (802.11b/g/n), Bluetooth (4.0 dual-mode)
Ports 2x USB2.0, 1x Micro USB, 1x HDMI, 1 x Ethernet Port, 1 x Audio Jack, 1x Micro SD Slot
Physical Parameters
Size 64mm x 60mm
Environmental Conditions and Safety
Operating Temprature -30℃ ~ +80℃

Write a review

Note: HTML is not translated!
   Bad           Good
Electronic & Robotic Supplier

Your B2B Supplying Partner in Mainland China

Worldwide Shipping

Using Vast Majority of International Couriers

Secure Payments

Always Pay with Trust by PayPal Express Checkout