STM32F103C6T6 Arm Board

STM32F103C6T6 Arm Board
Click image for Gallery
  • Product Code:SQ12463
  • Availability: 500
  • $1.80
  •  
  • Ex Tax:$1.80
This product has a minimum quantity of 3
+
-


Tags: ARM, STM32F103C6T6, Type-C

ARM mini boards are small, user-friendly boards that allow users to accomplish significant tasks with minimal time investment. The mini board with the STM32F103C6T6 processor has approximate dimensions of 21.7 by 26.16 millimeters, features a Type-C connector, operates at a frequency of 16 MHz, and has 32 KB of flash memory.

Note: Some models of mini boards include a CH340 serial converter, but this specific board does not come with that converter or a data cable.

 STM32F103C6T6 Type-C board application:

  1. Robotics
  2. Data Monitoring
  3. Internet of Things (IoT)
  4. Sensor Controller

STM32F103C6T6 Processor Mini Board Specification:

  1.  Processor: STM32F103C6T6
  2. Features a Type-C connector
  3. No CH340G converter
  4. No data cable
  5. Frequency: 16 MHz
  6. Required current: 1 Ampere
  7. Has 8 I/O pins
  8. Dimensions: 21.7 x 26.16 mm
  9. 32-bit ARM Cortex-M3 CPU core
  10. Maximum frequency 72 MHz, performance 1.25 DMIPS/MHz (Dhrystone 2.1) at 0-wait-state memory access
  11. Single-cycle multiply and hardware divide
  12. 32 KB Flash memory
  13. 10 KB RAM
  14. Clock, reset, and supply management
  15. Operating supply and I/O range: 2.0 to 3.6 V
  16. POR, PDR, and programmable voltage detector (PVD)
  17. 4 to 16 MHz crystal oscillator
  18. Factory-calibrated 8 MHz internal RC
  19. 40 kHz internal RC
  20. PLL for CPU clock
  21. 32 kHz oscillator for RTC with calibration
  22. Sleep, Stop, and Standby modes
  23. VBAT supply for RTC and backup registers
  24. 2 x 12-bit, 1 µs A/D converters (up to 16 channels)
  25. Conversion range: 0 to 3.6 V
  26. 7-channel DMA controller
  27. Supported peripherals: Timers, ADC, SPI, I²C, and USART
  28.  Up to 80 fast I/O ports
  29. 26/37/51/80 I/Os, all mappable to 16 external interrupt vectors and nearly all 5V-tolerant
  30. Debug mode
  31. Serial Wire Debug (SWD) and JTAG debugging interfaces
  32. Three 16-bit timers, each with up to 4 IC/OC/PWM or pulse counter and quadrature encoder (incremental) input
  33. 16-bit PWM timer for motor control with dead-time generation and emergency stop
  34. 2 watchdog timers (independent and window)
  35. 24-bit SysTick timer

Write a review

Note: HTML is not translated!
   Bad           Good
Captcha
Electronic & Robotic Supplier

Your B2B Supplying Partner in Mainland China

Worldwide Shipping

Using Vast Majority of International Couriers

Secure Payments

Always Pay with Trust by PayPal Express Checkout