MPL3115A2 Height And Pressure Sensor Module [1.9V-3.6V] [20KPa-110KPa]

MPL3115A2 Height And Pressure Sensor Module [1.9V-3.6V] [20KPa-110KPa]
  • Brands CJMCU
  • Product Code:SQ2192
  • Availability: In Stock
  • $8.99
  •  
  • Ex Tax:$8.99
This product has a minimum quantity of 2
+
-


Tags: Digital Pressure Sensor, Digital Sensor, Height Sensor, Height And Pressure, MP3115A2

Description:
CJMCU MPL3115A2 Height And Pressure Sensor Module [1.9V-3.6V] [20KPa-110KPa] is a two functions height and pressure sensor, which is based on MPL3115A2 Pneumatic Pressure Altitude Intelligent Temperature Sensor chip. This chip has a built-in 32-sample FIFO buffer and 24-bit resolution ADC which presents a full and high compensation algorithm to produce precision digitalized output with high resolution of 24bit. Because of this internal processing, remain less task for microcontroller processing. This sensor has offset adjustment capability and can work as a standalone data acquisition with limit alarms and extreme value recording. Also, it can provide up to 128 times oversampling rate, 32 FIFO sample buffers for data storage, and the host can read data when needing. This sensor can interface with microcontroller and Arduino boards through I2C read to write operations, without any additional component and data processing, that extremely decrease system power consumption.
This sensor has an LDO internal regulator, so it can be supplied with 1.95V up to 3.6V, with 8.5μA current at 1Hz sampling or 2uA at standby mode. the sensor is a valuable and intelligent digital pressure and height sensor, which can accurately detect and measure pressure, altitude, and temperature without needing back-end data processing to meet the application requirements of many applications such as mobile phone and tablet applications, high precision altimetry, personal electronics altimetry, weather station equipment, GPS enhancement for emergency services, map analysis assessments, other industrial and medical instruments.  

Features:
Chip: MPL3115A2
Output Type: Digital
Standby mode Current: 2μA
Low power mode Current: 8.5μA, 1Hz sampling
Input Voltage: 1.95V ~ 3.6V
I / O Voltage: 1.62V ~ 3.6 V
Pressure range: 20kPa ~ 110kPa
Relative measurement accuracy: ± 0.05 kPa
Effective resolution: 1.5Pa / 0.3m
Temperature Range: -40°C ~ 85°C
Compensated data output:
   - 20-bit pressure data, output unit Pascal
   - 20-bit height data, output unit meter
   - 12-bit temperature data, output unit degrees ℃
Two programmable interrupt pins
Built-in 32-sample FIFO buffer
Interface: I2C
Pin Number: 6 Pin
Size: 18mm x 18mm

Package Include:
1 x MPL3115A2 Pressure Sensor with Altimetry

Interfaces
Interface Type I2C
Sensor Parameters
Accuracy ± 0.05 kPa
Output Type Digital
Pressure Range 20kPa ~ 110kPa
Temperature Range -40°C ~ 85°C
Electrical Parameters
Input Voltage 1.95V ~ 3.6V
Current 2μA (Standby Mode) , 8.5μA (Low Power Mode))
Board Parameters
Main Chip MPL3115A2
Pin Count 6 Pin
Physical Parameters
Size 18mm x 18mm

Write a review

Note: HTML is not translated!
   Bad           Good
Captcha
Electronic & Robotic Supplier

Your B2B Supplying Partner in Mainland China

Worldwide Shipping

Using Vast Majority of International Couriers

Secure Payments

Always Pay with Trust by PayPal Express Checkout