MLX90615 Infrared Temperature Sensor Module

Description:
This module is based on MLX90615 that is an Infra-Red thermometer for non-contact temperature measurements. Both the IR sensitive thermopile detector chip and the signal conditioning chip are integrated with the same TO-46 can package. Small size, low cost, easy to integrate, high accuracy and resolution of the thermometer are the benefits of Infrared sensors.
The MLX90615 is factory calibrated in standard temperature ranges from -40~85˚C for the ambient temperature and from -40~115˚C for the object temperature. As a standard, the MLX90615 is delivered with a programmed object emissivity of one. It can be easily customized by the customer for any other emissivity in the range of 0.1 ~ 1.0 without recalibration with a black body. A low noise, low offset amplifier with a programmable gain is used for amplifying the IR sensor voltage. The systems with more than 100 devices can be built with only two signal lines.
The MLX90615 meets all the timing specifications of the SMBus. The maximum frequency of the MLX90615 SMBus clock is 100 kHz and the minimum is 10 kHz. It also can enter Sleep Mode via a command “Enter SLEEP mode” sent via the SMBus interface. So it is suitable for handheld mobile applications.

Features:
Chip: MLX90615
Output Type: Digital
Input voltage: 2.6V ~ 3.6V
Input voltage (Recommended): 3V
Measuring Range: -40 ~ +115°C
Resolution: 0.02°C
Interface: I2C
Pin Number: 4 Pins
ADC: 10bit
Operating Temperature: -40°C ~ + 85°C
Storage Temperature: -40°C ~ + 125°C

Package Include:
1 x Mlx90615 Digital Infrared Thermometer Module
1 x Pin header