2 PCS LM2596S Step Down Regulator Module [DC-DC] [3A]

2 PCS LM2596S Step Down Regulator Module [DC-DC] [3A]
  • Product Code:SQ1145
  • Availability: In Stock
  • $1.30
  • Ex Tax:$1.30
This product has a minimum quantity of 6

Tags: DC DC, Power Converter Module, Boost Converter, DC Adapter, DC DC Converter, Step Down Regulator

LM2596S Adjustable Step-Down Regulator Module [DC-DC] [3A] is an adjustable DC-DC step-down switching adapter with 3A high current and excellent line and load regulation, which is based on LM2596S 3.0 A, Step-Down Switching Regulator chip. The LM2596 chip is a buck converter and easy solution to build step down voltage regulator. This chip has high efficiency (about 92%). This converter chip is a switching mode power supply with the 150KHz high switching frequency, results in reducing the size of filter components. Due to the high switching frequency, this module is optimized to work with a small inductor.
This regulator is designed to minimize the number of external components to simplify the power supply design. This adapter can be used as a post regulator for DC adaptors and power supplies, battery charger or even an LED current source. This regulator is equipped with a precision multiturn potentiometers to accurately adjust both the output voltage and current. The input supplied voltage should be 1.5V higher than the output desired voltage. This regulator supports a wide range of input voltage from 1.5V up to 35V, with 3A  high current, but for long-time operating continuous current under 2.5A is recommended, and for operating power more than 10 watts, a heatsink is needed.
This adapter board can supply with car battery or cigaret ignition port to regulate car voltage, then adjust through the multi-turn potentiometer for supplying the smartphone, MP3 players, TV boxes, PSP, and so on, in traveling, camping and car driving situation. 

Rectifier: Non-Synchronous Rectification
Module Properties: Non-isolated step-down module (buck)
Input voltage: 3.2-35V
Output Voltage: 1.25-35V (adjustable)
Output current: rated current 2A, maximum 3A (heat sink required)
Conversion efficiency: Up to 92% (the higher the voltage, the higher the efficiency)
Switching Frequency: 65KHz
Output ripple: <30mV
Short circuit protection: current limiting
Operating temperature: -45 ℃ to +85 ℃
Full load temperature rise: 40 ℃
Load regulation: ± 0.5%
Voltage regulation: ± 0.5%
Dynamic response speed: 5% 200uS
Size: 43mm x 21mm x 14mm

Do not inversely connect input or output terminals, Otherwise may burn IC.

Package Include:
2 x DC-DC LM2596S 3A Step Down Module

Electrical Parameters
Frequency 65KHz (Switching Frequency)
Input Voltage 3.2V - 35V
Output Current 3A (max)
Output Voltage 1.25V - 35V
Board Parameters
Main Chip LM2596S
Physical Parameters
Operating Temperature -45 ℃ to +85 ℃
Size 43mm x 21mm x 14mm 

Write a review

Note: HTML is not translated!
   Bad           Good
Electronic & Robotic Supplier

Your B2B Supplying Partner in Mainland China

Worldwide Shipping

Using Vast Majority of International Couriers

Secure Payments

Always Pay with Trust by PayPal Express Checkout