Gas Leak Detector Plug-in Carbon Monoxide Temperature Humidity

Protect your family from invisible threats with this 4-in-1 gas leak detector. It monitors carbon monoxide (CO) gas concentration, temperature, and humidity in real time using a high-precision electrochemical sensor. The LCD color screen displays readings clearly, while a ≥85dB alarm and multi-colored visual lights alert you when CO exceeds safe levels. Easy plug-in installation – no tools required. Available with European or American standard plugs (AC100-240V).

High-Precision Electrochemical Sensor

• Accurate: Linear response to CO concentration
• Stable: Minimal drift over time
• Specific: Low cross-sensitivity to other gases
• Range: 0-999 ppm with 1 ppm resolution
• 3D Porous Duct Design for Real-Time Monitoring
• Faster response to CO presence
• More accurate readings in stagnant air conditions
• Real-time monitoring of changing air quality

Dual Alarm System – You Won't Miss the Warning

• Audible: ≥85dB at 1 meter distance (loud enough to wake you from sleep)
• Visual: Multi-colored lights change when CO exceeds safe levels

Flexible Installation – No Tools Required

• Simply plug this detector into any standard wall outlet:
• European standard plug or American standard plug available
• Wide voltage compatibility: AC100-240V (works in most countries)
• No batteries to replace – powered by outlet (though backup battery may be included in some models – check listing)

Carbon Monoxide Detector Application:

1. Home: (bedroom, living room) CO from furnaces, water heaters, attached garages
2. Kitchen: Gas stoves, ovens – potential CO sources
3. Garage: Vehicle exhaust, gas-powered tools
4. Factory / Workshop: Industrial equipment, forklifts, heaters
5. Office: Shared ventilation, parking garage proximity
6. Vehicle: (RV, camper)Propane appliances, generator exhaust
7. Hotel room: (travel) Portable protection when away from home

Gas sensor monitor Specification:

1. Monitor Type: 4-in-1 (CO, Temperature, Humidity)
2. Display: LCD color screen
3. Detection Method: Electrochemical sensor
4. CO Measurement Range: 0-999 ppm
5. Resolution:1 ppm
6. Alarm Volume: ≥85dB (at 1 meter)
7. Data Refresh Rate: 2 seconds
8. Warm-up Time: 35 seconds
9. Operating Temperature: -20°C ~ 60°C (-14°F ~ 140°F)
10. Operating Humidity: 0% ~ 95% RH
11. Material: ABS + PC
12. Color: Black
13. Operating Voltage: AC100-240V
14. Plug Options: European / American standard
15. Dimensions: 96 × 56 × 54 mm

Features:

• 4-in-1 Monitoring: Detects carbon monoxide (CO) gas, temperature, and humidity – comprehensive air quality awareness.
• High-Precision Electrochemical Sensor: Measures CO from 0-999 ppm with 1 ppm resolution – accurate and reliable.
• LCD Color Screen: Real-time readings with intuitive display for quick understanding of air conditions.
• 3D Porous Duct Design: Advanced airflow technology ensures real-time air circulation for more precise monitoring.
• Dual Alarm System: ≥85dB high-decibel sound + multi-colored visual lights – dual warnings ensure you never miss dangerous conditions.
• Quick Warm-Up: Ready to monitor in approximately 35 seconds.
• Fast Data Refresh: Updates readings every 2 seconds for real-time awareness.
• Flexible Installation: No tools required – plug directly into wall outlet. Compatible with multiple power standards (AC100-240V, 50/60Hz).
• Wide Environmental Range: Operates from -20°C to 60°C (-14°F to 140°F) and 0% to 95% relative humidity.

Installation Tips:

• Mount at proper height – CO is slightly lighter than air; detectors are effective at breathing level (approximately 5 feet/1.5 meters from floor).
• Avoid dead air spaces – corners, behind curtains, or near windows where airflow is restricted.
• Keep away from fuel-burning appliances – install at least 15 feet from furnaces, stoves, or water heaters to avoid nuisance alarms.
• Test regularly – use the test button to verify alarm function.
• Do not paint or cover – keep vents clear for air circulation.

Where NOT to Install:

• Directly above or beside fuel-burning appliances (may cause false alarms)
• In garages (vehicle exhaust can trigger alarms; install at least 10 feet from garage entry door)
• Outside (unless rated for outdoor use; this unit is indoor/outdoor but verify temperature range)
• In extremely dusty, greasy, or humid areas (affects sensor life)