10 PCS ESP8266 Adapter Board

10 PCS ESP8266 Adapter Board
Click image for Gallery
  • Product Code:SQ3162
  • Availability: 10000
  • $1.04
  •  
  • Ex Tax:$1.04
This product has a minimum quantity of 8
+
-


Tags: ESP8266 Adapter, ESP 07, ESP 08, ESP12

Description:
10 PCS ESP8266 Full IO ports Adapter Board [For ESP-07, ESP-08, ESP-12]  package contains 10 pieces of a WeMos ESP8266 module adapter plate with IO lead out that are developed for ESP-07 ESP-08 ESP-12. This shield is a peripheral board that can add a full IO serial port or a test board with IO lead out to the Wi-Fi ESP8266 boards without any module. 
This breakout board is suitable for your ESP8266-12E /12F, ESP-07 and ESP-08.
The ESP8266 series module is based on an ESP8266 Wi-Fi module and one and more peripheral board. The ESP8266 boards are WIFI Arduino shield boards with a 160MHz, 32bit self processor and TCP/IP protocol, that can add Wi-Fi communication capability to the Arduino and microcontroller boards and also supporting the APSD and VOIP protocol. The ESP8266 module has enough processing capability and storage to be added with other simple boards with at least expansion up-front and minimum loading during runtime. The ESP8266 development board is interfaced with other boards through the I2C, UART, and SPI serial communication protocol. Communication with ESP8266 and its configuration is performed through the "AT Command" instructions. The ESP8266 can incorporate with another simple usual board such as this micro switchboard, the sensor boards, driver boards, and so on, to add WIFI capability to these boards. So all the ESP8266 boards have uniform interfaces includes GPIO, I2C, UART, and SPI serial communication header pins.    

Note:
Need to solder 3V regulator by yourself.
Only need power VCC GND for power up the module, and TX, RX for serial communication.

ESP8266 Adapter Board Application:

  1. ESP-07
  2. ESP-08
  3. ESP-12

ESP8266 Adapter module Features:

  1. Reserved LDO place on the back of the board
  2. 10K resistor between CHPD and VCC, to enable chip
  3. 10K resistor between GPIO2 and GND
  4. GPIO15 to GND for normal flash boot mode

Document:

  1. How use ESP8266 adapter module Link
  2. ESP8266 board datasheet Link

Package included:
10 x Serial Port WIFI ESP8266 Module Adapter Plate
20 x 8Pins Header

Physical Parameters
Size 30 mm x 28 mm

Write a review

Note: HTML is not translated!
   Bad           Good
Captcha
Electronic & Robotic Supplier

Your B2B Supplying Partner in Mainland China

Worldwide Shipping

Using Vast Majority of International Couriers

Secure Payments

Always Pay with Trust by PayPal Express Checkout