UVC EasyCap Analog-to-USB Video Capture Adapter – Composite/S-Video, 720×480, OTG

The UVC EasyCap is an analog-to-USB video capture adapter that converts composite or S-Video signals into digital video for recording and streaming on a computer, laptop, or Android device. It connects through a USB 2.0 interface and captures NTSC video at 720×480 and 30 frames per second, or PAL at 720×576 and 25 frames per second, with stereo audio captured alongside the video without a separate sound card. Because it follows the USB Video Class (UVC) standard, the adapter is recognized as a plug-and-play camera on supported operating systems and works with common capture and streaming software. The package includes a USB cable and an OTG cable, so the same adapter can be used with an Android phone or tablet that supports OTG. A green LED indicates power status, and the compact 88 × 28 × 18 mm housing makes the unit easy to carry. This UVC capture card is suitable for digitizing VHS and camcorder footage, viewing FPV receiver output, and adding analog video sources to a PC-based recording setup.

1. Digitizing VHS tapes, camcorder footage, and legacy analog video sources.
2. Viewing and recording FPV receiver output on a laptop or Android device.
3. Adding composite or S-Video cameras to PC-based surveillance and recording setups.
4. Converting analog video for DVD authoring, editing, and web publishing.
5. Capturing live video and stereo audio for streaming and demonstration purposes.
6. Mobile video capture on Android phones and tablets that support USB OTG.

1. Model: UVC EasyCap (EasyCAP UVC FPV V2).
2. Interface: USB 2.0.
3. Input signal: analog composite or S-Video.
4. Output: USB 2.0 and phono jack.
5. Video formats: NTSC and PAL (the source page also lists SECAM).
6. Capture resolution and frame rate: NTSC 720×480 at 30 fps; PAL 720×576 at 25 fps.
7. Audio input: external audio source, stereo.
8. Power supply: 5V via USB bus.
9. Indicator: 1 × green LED (power on/off).
10. Dimensions (L × W × H): 88 × 28 × 18 mm.
11. Driver requirement: UVC-compliant, plug-and-play on supported operating systems.
12. Included cables: USB cable and OTG cable.