DK-M10 Electromagnetic Lock [12V, 24V]

12V/24V Solenoid lock is basically electromagnets. They are made of a big coil of copper wire with an armature (a slug of metal) in the middle. When the coil is energized, the slug is pulled into the center of the coil. This makes the solenoid able to pull from one end.

This solenoid lock, in particular, is nice and strong and has a slug with a slanted cut and a good mounting bracket. It’s basically an electronic lock, designed for a basic cabinet or safe or door. Normally the lock is active so you can not open the door because the solenoid slug is in the way. It does not use any power in this state.

When 12V/24V is applied, the slug pulls in so it doesn’t stick out anymore and the door can be opened.

The solenoid lock comes with the slanted slug as shown above, but you can open it with the two Phillips-head screws and turn it around so it is rotated 90, 180 or 270 degrees so that it matches the door you want to use it with.

Solenoid lock Application:

1. - Cabinet doors
2. - Wardrobe and shelf doors
3. - Design and implementation of smart doors
4. - Design and implementation of smart and security locks for wardrobes
5. - Design and implementation of digital wardrobe locks in offices, organizations, clubs, and buildings

Solenoid lock Specification:

1. Control Voltage: 12V, 24V DC (Optional)
2. Control Current: 500mA
3. Latch Telescopic Length: 10mm
4. Energized Forms: Intermittent
5. Unlocking Time: 1s ~ 10s
6. Operating Temperature: -40℃ ~ +50℃
7. Size: 54mm x 41mm x 30mm