TKS-M-8 DC Motor Forward and Reverse Controller Module with 20A Output and Limit Switch Inputs

TKS-M-8 DC Motor Forward and Reverse Controller Module with 20A Output and Limit Switch Inputs
Click image for Gallery
  • Product Code:SQ8955
  • Availability: 1000
  • $2.20
  •  
  • Ex Tax:$2.20
This product has a minimum quantity of 2
+
-


Tags: motor driver, forward reverse controller, TKS-M-8, 20A motor driver, DC motor module, limit switch controller, Reverse Controller Module

The TKS-M-8 is a DC motor forward and reverse controller module designed to provide precise bidirectional control of brushed DC motors in robotics, automation, and mechanical projects. Unlike simple PWM speed controllers that only adjust motor speed in one direction, this reversing motor driver board uses onboard relays to switch the motor polarity, allowing the connected motor to rotate clockwise or counterclockwise on command. The module accepts a wide 4.0V to 40V DC supply and can deliver up to 20A of output current, making it suitable for medium-power motors used in smart cars, robotic vehicles, automated curtains, and lifting mechanisms. Two start buttons (K1 for forward, K2 for reverse) and two limit switch inputs (SW1 and SW2) provide a complete control interface: pressing K1 drives the motor forward until SW1 closes, while pressing K2 reverses the motor until SW2 closes. The controller also supports immediate direction changes—if K2 is pressed during forward rotation, the motor switches to reverse without delay, and vice versa. Signal inputs are active-low and optocoupler-isolated, so the module can be driven directly by microcontrollers, PLCs, or simple push buttons with a voltage below 2V considered as a valid signal. The board measures 83mm by 46mm by 20mm and features screw terminals for motor and power connections, eliminating the need for soldering. With an operating temperature range of -40°C to +85°C, this 20A motor driver module is suitable for both indoor and demanding outdoor installations. Whether used to automate a curtain system, control a robot's drive motors, or build a motorized lifting mechanism, the TKS-M-8 offers a practical combination of high current capacity, bidirectional control, and straightforward wiring.

Application

  1. Robotics and smart car drive motor control
  2. Automated curtain and blind opening/closing systems
  3. Motorized lifting mechanisms with limit switches
  4. DIY electronic toys with forward/reverse motion
  5. Mechanical automation projects requiring bidirectional control
  6. Smart home devices with motorized movement

Specifications

  1. Model: TKS-M-8
  2. Operating voltage: 4.0V to 40V DC (6V to 36V recommended for reliable operation)
  3. Output current: 20A (maximum)
  4. Power consumption: 0.6W (without load)
  5. Static power consumption: 0.1W
  6. Control inputs: K1 (forward), K2 (reverse), SW1 (forward limit), SW2 (reverse limit)
  7. Signal input type: active-low, optocoupler-isolated
  8. Signal threshold: voltage below 2V considered as valid signal
  9. Response time: 20ms for K1/K2, 50ms for SW1/SW2
  10. Operating temperature: -40°C to +85°C (per manufacturer datasheet)
  11. Operating humidity: 0% to 95% RH
  12. Dimensions: 83mm × 46mm × 20mm (length × width × height)
  13. Terminals: screw terminals for motor and power connections
  14. Control method: relay-based polarity reversal
Motor Specifications
Motor Current 20A
Electrical Parameters
Operating Voltage 6V ~ 40V DC
Power Consumption 0.6W (Without load)
Physical Parameters
Size 83mm x 46mm x 20mm

Write a review

Note: HTML is not translated!
   Bad           Good
Captcha
Electronic & Robotic Supplier

Your B2B Supplying Partner in Mainland China

Worldwide Shipping

Using Vast Majority of International Couriers

Secure Payments

Always Pay with Trust by PayPal Express Checkout