CJMCU SN75176A Two-way Transmitter Module

CJMCU SN75176A Two-way Transmitter Module
Click image for Gallery
  • Product Code:SQ11897
  • Availability: 1000
  • $2.90
  •  
  • Ex Tax:$2.90
This product has a minimum quantity of 2
+
-

0 reviews / Write a review

Tags: CJMCU-75176, IC sn75176a, CJMCU, two-way transmitter chip module CJMCU-75176

Description:

The SN75176A differential bus transceiver is a monolithic integrated circuit designed for bidirectional data communication on multipoint bus-transmission lines. It is designed for balanced transmission lines and meets ANSI Standard EIA/TIA-422-B and ITU Recommendation V.11.
The SN75176A combines a 3-state differential line driver and a differential input line receiver, both of which operate from a single 5-V power supply. The driver and receiver have active-high and active-low enables, respectively, that can be externally connected together to function as a direction control.
The driver differential outputs and the receiver differential inputs are connected internally to form differential input/output (I/O) bus ports that are designed to offer minimum loading to the bus whenever the driver is disabled or VCC = 0. These ports feature wide positive and negative common mode voltage ranges making the device suitable for party-line applications.
The driver is designed to handle loads up to 60 mA of sink or source current. The driver features positive and negative-current limiting and thermal shutdown for protection from line fault conditions. Thermal shutdown is designed to occur at a junction temperature of approximately 150°C. The receiver features a minimum input impedance of 12 kΩ, an input sensitivity of ±200 mV, and a typical input hysteresis of 50 mV.

The SN75176A can be used in transmission-line applications employing the SN75172 and SN75174 quadruple differential line drivers and SN75173 and SN75175 quadruple differential line receivers.

The SN75176A is characterized for operation from 0°C to 70°C.

Application:
Low Speed RS485 communication (5 Mbps or less)
For 10 Mbps, use SN75176B

Features:
VCC, Supply Voltage: 4.75 ~ 5.25 V
VI or VIC, Voltage at any buss terminal: (separately or common mode) –7 ~ 12 V
VIH, High-level input voltage: min 2 V
VIL, Low-level input voltage: max 0.8 V
VID, Differential input voltage: ±12 V
IOH, High-level output current: Driver –60 mA, Receiver –400 µA
IOL, Low-level output current: Driver 60mA, Receiver 8
Operating free-air temperature 0 ~ 70 °C

IC datasheet sn75176a

Write a review

Note: HTML is not translated!
   Bad           Good
Captcha
Electronic & Robotic Supplier

Your B2B Supplying Partner in Mainland China

Worldwide Shipping

Using Vast Majority of International Couriers

Secure Payments

Always Pay with Trust by PayPal Express Checkout