6 in 1 Blade and Spatula IC Removal Tool

the multi-purpose blade is used for removing bga ics, cpu chips, nand, and removing adhesive around the ics. this blade is made of flexible steel and does not deform; it is also resistant to heat and both high and low temperatures. it does not stick to tin and can separate solder points, is oxidation-resistant, corrosion-resistant, and wear-resistant, which are its notable features. how to use: 1: when separating the chip, first clean the edge adhesive at the cutting point and the black adhesive around the chip. 2: turn on industrial hair dryers or soldering heaters at 150 degrees and use the airflow outlet at high speed to preheat the motherboard for 2 minutes. 3: change the head of the industrial hair dryers or soldering heaters to a small tip, set the temperature to 350 degrees, then bring the blade close to the chip, moving it left and right, and finally insert it from the bottom of the chip. note: when you move the blade left and right and cannot separate the component from the board, it means that the soldered points or adhesive have not melted yet.

application of cpu chip separation tool:

1. for separating and repairing mobile phone cpu
2. repairing the motherboard
3. repairing hardware
4. repairing instrumentation
5. for separating solder connections
6. solid state drive (ssd)
7. flash memory
8. other chips
9. removing ic
10. cleaning the adhesive under all chips

specifications of the tools JSD-666Q:

1. blade material: flexible steel
2. handle material: aluminum alloy + thermoplastic tube
3. size: 178x95x15 mm