BME280 Multi Sensor Module [3.3V] [300hPa-1100hPa]

BME280 Multi Sensor  Module [3.3V] [300hPa-1100hPa]
  • Brands sparkfun
  • Product Code:SQ4628
  • Availability: In Stock
  • $11.30
  • Ex Tax:$11.30
This product has a minimum quantity of 2

Tags: Atmospheric Pressure Sensor, Air Pressure Sensor, Digital Sensor, Digital Pressure Sensor, CJMCU280, BME280

CJMCU Bosch BME280 Temperature Humidity Atmospheric Pressure Sensor Module [3.3V] [300hPa-1100hPa] is a highly compact size and high precision pressure detector, which is based on Bosch's BME280 Combined humidity and pressure sensor chip. This chip is a multi-sensor of pressure, humidity, and temperature that can independently detect and measure the humidity or pressure or both. The BMP280 chip with low height (0.93mm) and compact space is specialized for mobile phones. Beside small dimensions, this chip consumes very low power (operating current of 3.6 µA @ 1 Hz humidity, pressure, and temperature), which is idealized it for battery supplied applications such as mobile phones, GPS modules, smart wearable application, smartwatches, and so on. This sensor can interface with external Arduino boards through the I²C (up to 3.4 MHz) and SPI (3 and 4 wire, up to 10 MHz) interfaces. This module has a 3.3V SPI, a 5V indulgent I2C  (with pull-up resistors to 3.3V) that can be supplied with 1.71V to 3.6V less than 1mA. This module can detect and measure temperature from  -40°C  up to +85°C, humidity from zero up to 100 % RH, and pressure from 300 up to 1100 hPa.
The BMP280 chip is built based on piezo-resistive pressure sensor with high precision, linearity treatment, long term stability, and high EMC reliability. So this sensor module is ultra-low power consumption, high precision small, stable, and EMC reliable, which make it very suitable for portable applications and can be used in enhancing GPS navigation (e.g. time-to-first-fix improvement, dead-reckoning, slope detection), indoor navigation (floor detection, elevator detection),  outdoor navigation, recreation and sports applications,  weather forecasting devices, health care and medical instruments (e.g. spirometry),  vertical velocity indication (e.g. rise/sink speed).    

Chip: BME280
Output Type: Digital
Input Voltage: 1.71V ~ 3.6V
I/O Voltage : 1.2V ~ 3.6V
Current consumption:  1.8 μA @ 1Hz humidity and temperature
                                    2.8 μA @ 1Hz pressure and temperature
                                    3.6 μA @ 1Hz humidity, pressure, and temperature
                                    0.1 μA in sleep mode
Pressure Range: 300hPa ~ 1100hPa
Temperature Range: -40°C ~ +85°C
Humidity Range: 0% ~ 100%
Humidity Accuracy: ±3%
Humidity Hysteresis: ±1%
Measurement time: 1s
Interface: I2C (up to 3.4 MHz), SPI (3 and 4 wire, up to 10 MHz)
Pin Number: 10 Pin
Size: 22mm x 11mm

Package Include:
1 x BME280 Atmospheric Pressure Sensor Module
1 x Pin header

Interface Type I2C (up to 3.4 MHz) , SPI (3 and 4 wire, up to 10 MHz)
Sensor Parameters
Accuracy ±3% (Humidity)
Measurement Time 1s
Output Type Digital
Pressure Range 300hPa ~ 1100hPa
Humidity Range 0% ~ 100%
Temperature Range -40°C ~ +85°C
Electrical Parameters
Input Voltage 1.71V ~ 3.6V
Current 1.8μA (1Hz humidity and temperature) , 2.8μA (1Hz pressure and temperature) , 3.6μA (1Hz humidity, pressure, and temperature) , 0.1μA (sleep mode)
Board Parameters
Main Chip BME280
Pin Count 10 Pin
Physical Parameters
Size 22mm x 11mm

Write a review

Note: HTML is not translated!
   Bad           Good
Electronic & Robotic Supplier

Your B2B Supplying Partner in Mainland China

Worldwide Shipping

Using Vast Majority of International Couriers

Secure Payments

Always Pay with Trust by PayPal Express Checkout