Ardupilot APM Voltage and Current Module

The ArduPilot power module is used for connection to flight controllers based on ArduPilot, such as APM or Pixhawk and MultiWii. It was designed and built from the outset to supply an appropriate voltage with the lowest possible noise, as well as to monitor the system's consumed voltage by the flight controller. However, later, with the creation of new versions of flight controllers and the increase in energy consumption, the BEC section for supplying its internal voltage, which was weak for new systems, was removed from these boards, and the choice of a regulator with an appropriate amperage was left to the customers' discretion. This module, by being placed between the battery and the system's input and consumed power and the speed controllers, while providing accurate information on current consumption and consumption monitoring to the flight controller, provides the task of regulating and stabilizing the appropriate supply voltage for the ArduPilot. The use of this module is recommended because it isolates the autopilot from the noise of the speed controllers.

The ArduPilot power module is designed solely for supplying electrical power and/or monitoring the consumption of APM, Pixhawk, and MultiWii flight controllers and their accessories, including GPS and telemetry radio.

ArduPilot Power Module Application:

1. APM ardupilot
2. Pixhawk pilot
3. Multiwii pilot

ArduPilot power module Specification:

1. Output: 5.3VDC, 2.25A
2. Max input voltage: 30V
3. Max current sensing: 90A
4. Voltage and current measurement configured for 5V ADC
5. Size:2.1 x 2.3 cm
6. Net weight:18 g