APDS-9900 Proximity and Ambient Light Sensor Module [2.8V-3.8V]

Description: 
This module is based on APDS-9900 that provides digital ambient light and proximity sensors (ALS), infrared LED and a complete proximity detection system in a single 8 pin package. The proximity function can be carried out with a 100 mm plug and play test (without the windshield) and thus reduces the need for a terminal device or sub-assembly plant calibration. 
From the bright sunlight to the darkroom, the detection function can be operated well. A wide dynamic range is allowed, such as a mobile-phone dark glass after a short distance detection operation. In addition, the internal state machine has the ability to position the device in a low power mode between ALS and proximity measurements, providing a very low average power consumption. ALS can react with brightness after extremely low light conditions or dark panels. 
APDS-9900 is particularly useful for display management, which aims to extend battery life and provide the best visibility in different light conditions. 
Display panel and keyboard backlight accounted for the entire platform power up to 30% to 40%. ALS features are ideal for Notebook Computers, LCD Monitors, Flat-panel TVs, and Mobile phones.
Near the ground, the function is especially suitable for near-field applications. In the phone, proximity detection can be placed in the user when the phone in their ears to detect. When using a cell phone to make a call, the device can quickly provide access to the required high repetition rate. This feature provides improved "green" power saving capability and increased security in order to lock the computer in case the user is not present. The optical lens can increase the efficiency of the transmission and the infrared energy of the receiver, which can reduce the overall power consumption.

Specifications:
Ambient Brightness Sensing (ALS):
Similar to the human eye's visual response
Programmable interrupt function with upper and lower thresholds
High sensitivity works after dark glass
Up to 1,000,000: 1 dynamic range

Proximity detection:
Fully calibrated to 100 mm detection
Integrated infrared LED and synchronous LED driver
Eliminate close "factory calibration"
2000: 1 dynamic range

Programmable wait timer:
Wait for state power - 70μA typical
The programmable range is 2.72 ms to more than 6 seconds

Features:
Chip: APDS-9900
Input Voltage: 2.8V ~ 3.8V
Output Type: Digital
ADC: 16 bit
Interface: I2C (Fast Mode)
Pin Number: 5 Pins
Operating Temperature: -30°C ~ +85°C
Storage Temperature: -40°C ~ +85°C
Size: 13mm x 15mm

Package Include:
1 x CJMCU APDS-9900 Digital Environment Brightness Module