ADS1293 3-Channel 24-Bit ECG Analog Front-End Module for Biopotential Measurement

ADS1293 3-Channel 24-Bit ECG Analog Front-End Module for Biopotential Measurement
Click image for Gallery
  • Brands CJMCU
  • Product Code:SQ3978
  • Availability: 1000
  • $24.25
  •  
  • Ex Tax:$24.25
+
-


Tags: ECG module, ADS1293, biopotential sensor, heart rate sensor, 24-bit AFE, low power ECG

The ADS1293 is a fully integrated 3-channel 24-bit analog front-end (AFE) designed for portable, low-power ECG and biopotential measurement applications. Unlike discrete ECG front-ends that require separate instrumentation amplifiers, filters, and ADCs, this module integrates three high-resolution delta-sigma channels, EMI-hardened inputs, a right-leg drive amplifier, and AC/DC lead-off detection in a single compact package. Each of the three ECG channels can be independently programmed for a specific sample rate and bandwidth, allowing users to optimize the configuration for either performance or power consumption. The module supports data rates up to 25.6ksps and draws only 0.3mW per channel, with an input-referred noise of 7µVpp over a 40Hz bandwidth and an input bias current of 175pA. A fourth auxiliary channel enables analog pace detection for systems that do not use digital pace detection. Flexible routing allows independent lead-off detection, right-leg drive, and Wilson/Goldberger reference terminal generation without reconnecting leads externally. The ADS1293 ECG module also includes a self-diagnostics alarm system that reports out-of-range conditions via error flags on a dedicated ALARMB pin. The analog supply voltage range of 2.7V to 5.5V and digital I/O supply of 1.65V to 3.6V accommodate a wide range of portable power architectures. This 24-bit biopotential module operates over -20°C to +85°C and is well suited to Holter monitors, event recorders, stress test systems, telemedicine devices, automated external defibrillators, and sports/fitness heart rate monitoring. Whether used in a clinical prototype or a wearable wellness device, this low power ECG AFE offers a practical combination of integration, signal quality, and power efficiency.

Application

  1. Portable 1/2/3-lead ECG monitors and Holter recorders
  2. Heart rate monitoring in sports and fitness wearables
  3. Patient vital sign monitoring and telemedicine devices
  4. Event and stress test ECG systems
  5. Automated external defibrillator (AED) front-end
  6. Biopotential research and clinical prototyping

Specifications

  1. Model: ADS1293_Electrocardiogram (CJMCU)
  2. Main chip: ADS1293 (Texas Instruments)
  3. Number of ECG channels: 3 (24-bit delta-sigma)
  4. Auxiliary channel: 1 (analog pace detection)
  5. Maximum data rate: 25.6 ksps
  6. Power consumption: 0.3 mW per channel
  7. Input-referred noise: 7 µVpp (40 Hz bandwidth)
  8. Input bias current: 175 pA
  9. Differential input voltage range: ±400 mV
  10. Analog supply voltage: 2.7V to 5.5V
  11. Digital I/O supply voltage: 1.65V to 3.6V
  12. Input type: EMI-hardened
  13. Lead-off detection: AC and DC
  14. Reference terminals: Wilson and Goldberger
  15. Right-leg drive amplifier: integrated
  16. Diagnostics: ALARMB pin for interrupt-driven error flags
  17. Battery voltage monitoring: integrated
  18. Oscillator and reference: built-in
  19. Power modes: flexible power-down and standby
  20. Operating temperature range: -20°C to +85°C
Electrical Parameters
Input Voltage 5V
Data Rate 25.6ksps
Board Parameters
Main Chip ADS1293
Pin Count 9 Pins
Physical Parameters
Size 46.7mm x 34.1mm x 6.7mm

Write a review

Note: HTML is not translated!
   Bad           Good
Captcha
Electronic & Robotic Supplier

Your B2B Supplying Partner in Mainland China

Worldwide Shipping

Using Vast Majority of International Couriers

Secure Payments

Always Pay with Trust by PayPal Express Checkout