TB6612FNG Stepper / DC Motor Driver Module

TB6612FNG Stepper / DC Motor Driver Module
  • Product Code:SQ1469
  • Availability: In Stock
  • $4.30
  • Ex Tax:$4.30
This product has a minimum quantity of 5

Tags: Stepper Motor Driver, DC Motor Driver, Robot, TB6612FNG

The TB6612FNG motor driver module is capable of launching two DC motors in a constant current of 1.2A (peak current 3.2A). Two input signals (IN1 and IN2) can be used to control the engine in one of four modes: CW, CCW, short-brake and stop. The output of the two motors of this module (A and B) can be controlled individually. Each engine speed is controlled by a PWM input signal with a frequency up to 100KHz. The STBY pin must be in High mode to exit the standby mode. The logical power supply voltage (VCC) can be in the range of 2.7 to 5 volts, and the motor supply voltage (VM) is limited to a maximum voltage of 15 volts. The output current of this module is 1.2A per channel (or 3.2A for a short pulse signal). This module is fully compatible with Arduino wins. 

Supply Voltage: VM = 15V MAX and VCC = 2.7-5.5V 
Output Current: Moderate 1.2A and peak current 3.2A
CW / CCW / short brake / stop control with standby control for motor 
with internal thermal shutdown circuit and low voltage measurement 

Package Include:
1X TB6612FNG Module
Motor Specifications
Peak Current 3.2A
Electrical Parameters
Voltage VM : DC 15V VCC : DC 2.7-5.5V
Physical Parameters
Size 18mm x 20mm

Write a review

Note: HTML is not translated!
   Bad           Good
Electronic & Robotic Supplier

Your B2B Supplying Partner in Mainland China

Worldwide Shipping

Using Vast Majority of International Couriers

Secure Payments

Always Pay with Trust by PayPal Express Checkout