MCP2515 CAN Bus with TJA1050 Receiver Module

MCP2515 CAN Bus with TJA1050 Receiver Module
  • Product Code:SQ1799
  • Availability: In Stock
  • $2.30
  •  
  • Ex Tax:$2.30
This product has a minimum quantity of 7
+
-


Tags: CAN Bus, TJA1050 Receiver, Arduino MCP2515, Bus Module, MCP2515, TJA1050 CAN

Description:
MCP2515 CAN Bus Module With TJA1050 Receiver is a simple and standalone CAN Controller module with a built in SPI Interface for communication with microcontrollers, which is based on MCP2515 CAN Controller chip and TJA1050 CAN Transceiver chip. This chip applies the CAN aspects, Version 2.0B. Which allows it to transmit and receive both standard and extended data and remote frames. The MCP2515 can interface with microcontrollers through an industry standard SPI (Serial Peripheral Interface). The MCP2515 IC is the main controller chip and composes of the CAN part, the control logic part and the SPI block.
The TJA1050 receiver chip is an interface between the CAN protocol controller and the physical bus, so it takes the data from the controller and relays it on to the bus. It furnishes 2 abilities, one ability of differential transmits to the bus and second ability of differential receive to the CAN controller. It is completely compliant with the “ISO 11898” standard and has a high speed with a very low EME (Electro Magnetic Emission). 
Therefore, This CAN bus module is a standalone CAN Controller, which has an integrated SPI Interface for communication with microcontrollers. Its pin and function is compatible with the MCP2510 and also includes upgraded specifications like faster throughput, data byte filtering, and support for time-triggered protocols.

Features:
Support CAN 2.0B protocol
Use High-speed CAN transceiver TJA1050
Dimension: 40mm × 28mm
SPI control for expanding Multi CAN bus interface
8MHZ crystal oscillator
120Ω terminal resistance
Use the serial port could view the communication data
With an independent key, LED indicator, Power indicator
With power pin

Pin outs:
VCC: 5V power input pin
GND: power ground pin
CS: SPI SLAVE select pin (Active Low)
SO: SPI master input slave output lead
SI: SPI master output slave input lead
SCLK: SPI clock pin
INT: MCP2515 interrupt pin

Package Include:
1 x CAN Bus Module

Interfaces
Interface Type SPI
Electrical Parameters
Output Current 5mA
Voltage 5V DC
Static current 1uA
Board Parameters
Clock Speed 8MHZ
Main Chip MCP2515 (CAN Controller ) and TJA1050 (CAN Transceiver)
Physical Parameters
Size 40mm × 28mm
Weight 7g
Environmental Conditions and Safety
Operating Temprature -40 ℃ ~ +85 ℃

Write a review

Note: HTML is not translated!
   Bad           Good
Captcha
Electronic & Robotic Supplier

Your B2B Supplying Partner in Mainland China

Worldwide Shipping

Using Vast Majority of International Couriers

Secure Payments

Always Pay with Trust by PayPal Express Checkout