FT260 HID-Class USB to I2C-UART Converter Module

FT260 HID-Class USB to I2C-UART Converter Module
Click image for Gallery
  • Brands CJMCU
  • Product Code:SQ6806
  • Availability: 9998
  • $9.99
  • Ex Tax:$9.99

Tags: USB to I2C, USB to UART, USB to Serial, USB Adapter, I2C Adapter, Serial Adapter, UART Adapter, Interface Converter


The CJMCU-FT232H is a high speed (480MB / s) USB 2.0 UART / FIFO integrated circuit. It can be configured in various standard serial or parallel interfaces. The FT232H has the following advanced features: Single channel USB / serial / parallel ports with a variety of configurations, Full USB protocol managed on the chip. No USB specific firmware programming is required, High speed (480 Mbits / second) and full speed (12 Mbits / second) USB 2.0 compatible.
This product based on FT260 that allows UART and I2C communication from your device to the computer. You can connect an external microcontroller to send data to the computer. This chip is what you would find in a laser mouse, the rotary encoder or laser tracks the movement and the microcontroller onboard does the calculation to be sent via this chip to your computer using the USB connector.

USB2.0 compliant Full Speed device with entire USB protocol handled on the chip.
Support 2 USB HID Interfaces, each corresponding to the on-chip physical interfaces, I2C and UART
Pin configuration of enabling HID interface for a variety of application
HID over I2C specification support
Configurable I2C Master Interface controller conforming to I2C v2.1 and v3.0 specification.
Support 4-speed modes defined in I2C-bus Specification, standard mode (SM), fast mode (FM), Fast-mode plus (FM+), and High-Speed mode (HS)
Robust FTDI UART controller with hardware and software flow control
Configurable GPIOs can be easily controlled by software applications under HID class via the USB bus
Fully integrated oscillator PLL with no external crystal required
On-chip eFUSE for USB Vendor ID (VID), Product ID (PID), and other vendor-specific parameters.
Unique USB serial number generation engine and programming path to external EEPROM.
+5V USB VBUS detection engine
USB Power Configurations; supports bus-powered, self-powered and bus-powered with power switching.
USB2.0 Low operating and suspend current; 24mA (active-typ) and 385µA (suspend-typ).
True 3.3V CMOS drive output and TTL input. (operates down to 1V8 with external pull-ups)
pin output drive strength; 4 mA(min) and 16 mA(max)
Integrated power-on-reset circuit.
USB Battery Charger Detection.
UHCI / OHCI / EHCI / XHCI host controller compatible.

Chip: FT260
Operating Voltage: 5V , 3.3V , 1.8V
Multiple I/O operating voltage level: 3.3V , 2.5V , 1.8V
Baud Rate: 1.2 Kbuad ~ 12 Mbaud (at TTL level)
Interface: I2C , UART , USB
Pin Number: 27 Pin
Operating Temperature: -40°C ~ 85°C

Driver Support:
The USB Human Interface Device (HID) class is natively supported by most operating systems. 
A custom driver is not required to be installed for the FT260.
Windows 10 32, 64-bit
Windows 8.1 32, 64-bit
Windows 8 32, 64-bit
Windows 7 32, 64-bit
Windows Vista and Vista 64-bit
Windows XP and XP 64-bit
Windows CE 4.2, 5.0, 5.2, 6.0
Windows Server 2008, 2003, 2000
Windows Embedded Operating Systems
For Mac OS X

Typical Applications:
HID class Device controller
USB to HID-over-I2C Bridge
USB to I2C master controller
USB to RS232/RS422/RS485 Converters
Interfacing MCU/PLD/FPGA based designs to USB
USB Instrumentation

Package Include:
1 x CJMCU FT260 HID-Class USB to I2C/UART Module

Interface Type I2C , UART , USB
Electrical Parameters
Baudrate 1.2 Kbuad ~ 12 Mbaud (at TTL level)
Operating Voltage 5V , 3.3V , 1.8V
Board Parameters
Main Chip FT260
Pin Count 27 Pin
Environmental Conditions and Safety
Operating Temprature -40°C ~ 85°C

Write a review

Note: HTML is not translated!
   Bad           Good
Electronic & Robotic Supplier

Your B2B Supplying Partner in Mainland China

Worldwide Shipping

Using Vast Majority of International Couriers

Secure Payments

Always Pay with Trust by PayPal Express Checkout