10 PCS CP2102 Micro USB to TTL Converter Module [6 Pin]

Description:

This module uses CP2102 chip , that generates COM port after installing the driver. The standard input MICRO MINI-USB cable when connected to the computer USB interface, it gives 3.3V and 5V two power outputs. It comes with a resettable fuse. In the event of accidental short-circuit, it can effectively protect your device and computer USB port. There are on-board status indicators to display the data receiving and sending status. It supports baud rates from 300bps ~ 1Mbps. The supported operating systems are windows 8.1/7/vista/xp/98, Windows 8, Windows 10, Mac OS-X/OS-9, Linux.
The CP2102 Module is a compact and versatile USB to UART bridge module that facilitates communication between a computer's USB port and UART devices, such as microcontrollers, sensors, and other electronics. The CP2102 converts USB signals into serial UART signals, enabling seamless data exchange between the computer and connected devices.

This converter module has 6 pins features as below:
Data formats supported:
Data bits: 5, 6, 7, and 8
Stop bits: 1, 1.5, and 2
Parity: odd, even, mark, space, no parity

USB to serial converter Module Application:

1. electronics
2. robotics
3. connection module to different platform

USB to serial converter Module Specifications:

1. Chip: CP2102
2. Interface: Micro USB , TTL
3. Baud rates: 300bps ~ 1Mbps
4. Output Current: 500mA (at 5V) , 100mA (at 3.3V)
5. Onboard, resettable fuse protects your computer's USB port
6. Red LEDs indicate Tx, Rx, and connection to a computer
7. DTR pin allows you to easily upload your program to devices such as an ATmega328P Pro Mini
8. 576 Byte receive buffer
9. 640 byte transmit buffer
10. Pin Number: 6 Pin
11. Size: 20mm x 16mm

Documents:

1. CP2102 chip datasheet Link
2. CP2102 MICRO USB to UART TTL Module  link