ZMCT103C 5A to 5mA PCB Current Transformer Module with Onboard Signal Conditioning

ZMCT103C 5A to 5mA PCB Current Transformer Module with Onboard Signal Conditioning
Click image for Gallery
  • Product Code:SQ2690
  • Availability: 1000
  • $0.69
  •  
  • Ex Tax:$0.69
This product has a minimum quantity of 7
+
-


Tags: current transformer, ZMCT103C, CT module, 5A sensor, AC current sensor, PCB transformer

The ZMCT103C is a precision PCB-mount current transformer module designed to step down AC currents up to 5A into a proportional 5mA secondary signal, making it suitable for direct interfacing with energy meters, microcontroller ADCs, and industrial monitoring systems. The module uses a 1000:1 turns ratio and offers a linear range of 0 to 10A with 0.2% linearity, so the output remains proportional even when the measured current varies across a wide operating window. An onboard operational amplifier circuit conditions the secondary signal, and a potentiometer allows the gain to be adjusted for different sampling resistor values and ADC input ranges. This AC current sensor module provides 3000V isolation between the primary and secondary sides, protecting the measurement electronics from the higher voltage present on the AC line. The compact epoxy-encapsulated transformer measures Ø5mm inner diameter by Ø18.2mm outer diameter by 19.2mm length by 18.2mm width by 10.2mm height, and it mounts directly onto a PCB with through-hole pins. With an operating temperature range of -40°C to +70°C for the complete module, this current sense module is suitable for indoor energy meters, household appliance monitoring, industrial control panels, and relay protection circuits. Whether you are building a smart energy meter, an overload detection circuit, or a ground fault monitoring system, this 1000:1 current transformer offers a practical combination of isolation, linearity, and ease of integration.

Application

  1. Single-phase energy meters and smart metering systems
  2. Overload current detection and protection circuits
  3. Ground fault and earth leakage monitoring
  4. Household appliance current monitoring
  5. Industrial control panels and electrical test equipment
  6. Analog-to-digital conversion circuits for AC current measurement

Specifications

  1. Model: ZMCT103C-Module
  2. Rated input current: 5A
  3. Rated output current: 5mA
  4. Turns ratio: 1000:1
  5. Linear range: 0 to 10A
  6. Linearity: 0.2%
  7. Accuracy class: 0.2
  8. Isolation voltage: 3000V (per module source); transformer datasheet states 4000V to 4500V
  9. Load resistance: 50Ω
  10. Phase difference: ≤20' (at rated input)
  11. Operating temperature: -40°C to +70°C (module); transformer datasheet states -40°C to +85°C
  12. Encapsulation: epoxy resin
  13. Mounting: PCB through-hole
  14. Dimensions (transformer): inner Ø5mm × outer Ø18.2mm × length 19.2mm × width 18.2mm × height 10.2mm
  15. Onboard signal conditioning: operational amplifier with adjustable gain
Electrical Parameters
Input Current 5A
Output Current 5mA
Working Voltage 5V ~ 30V
Isolation Voltage 3000V
Transformer Ratio 1000:1
Board Parameters
Pin Count 4 Pins
Physical Parameters
Operating Temperature -40°C ~ 70°C
Size 38mm x 18.5mm

Write a review

Note: HTML is not translated!
   Bad           Good
Captcha
Electronic & Robotic Supplier

Your B2B Supplying Partner in Mainland China

Worldwide Shipping

Using Vast Majority of International Couriers

Secure Payments

Always Pay with Trust by PayPal Express Checkout