Orange Pi Zero Allwinner H2 + Quad-core Development Board

The Orange Pi Zero development board is a small Arm Linux board based on the Allwinner H2+ processor for headless applications that require WiFi and/or Ethernet. It uses 100M internal network port, internal memory, USBOTG power supply, USB2.O port, etc. Board storage, LED indicators, low-level peripherals compatible with GPIO ports and a unique serial debug port.

If you care about power consumption and/or temperature, Armbian's h3consumption tool can disable some features (eg HDMI, GPU, Ethernet, CPU cores...) to reduce power consumption.

In terms of hardware specs, the Orange Pi Zero LTS is based on an Allwinner H2+ SoC with a quad-core Cortex-A7 processor with 256MB or 512MB of DDR3–1866 SDRAM, SPI Flash, and a Mali-400MP2 GPU.

The SPI flash can be used for U-boot storage, so network booting is possible without the need for a microSD card. Also available is a three-pin header for console/debug applications, a pair of LEDs, and power via a micro USB or PoE port.

Computer

Wireless server

Game console

Music and sounds

HD video

Android

Scratch

CPU: Quad-core H2 Cortex-A7 H.265/HEVC 1080P

GPU: GPU Mali400MP2 @600MHz / supports OpenGL ES 2.0

Memory (SDRAM): 256MB/512MB DDR3

Internal memory: 100M / 10M Ethernet RJ45 (POE is off by default)

WiFi antenna: Wifi XR819, IEEE 802.11 b/g/n

Audio input: MIC

Video outputs: Support external board via 13 pins

USB 2.0 port, one USB 2.0 host, one USB 2.0 OTG

13-pin header, with 2 USB, infrared pin, audio (MIC, AV)

GPIO pin (1x3) UART, ground

Support Android, Lubuntu, Debian, Raspberry Pi image

Power supply: 5V 3A