ESP8266 2 Channel WiFi Relay Module [5V] [10A]

ESP8266 2 Channel WiFi Relay Module [5V] [10A]
Click image for Gallery
  • Product Code:SQ6250
  • Availability: 10000
  • $4.40
  •  
  • Ex Tax:$4.40
This product has a minimum quantity of 2
+
-


Tags: 5V Relay, 10A Relay, 2 Channel Relay, WiFi Relay, Smart Home, Wifi SoC, IOT Wifi, ESP8266 Relay

Description:
The 5V dual WiFi relay module uses ESP-01 as the WiFi module and is compatible with 8 bit MCU chips. Only a simple configuration process can realize the wireless control of the 2-way relay by using the mobile phone APP in the LAN.

Features:
Onboard ESP-01 WiFi modules and high-performance microprocessor STM8S103.
The use of Smartcongig technology in the mobile phone on the APP ESP-01 WiFi module to complete the account and password configuration, configured username, and password memory function.
Board mode selection and real-time working status indicator.
Reserved UART debug interface and STM8 SWIM program download interface.
Control Voltage: 5V
Output Voltage: 250Vac , 30VDC
Output Current: 10A
Interface: UART
Size: 59mm x 40mm

Operating modes of work:
Mode 1: mobile phone is directly mounted on the WiFi module.
Mode 2: mobile phones and WiFi modules are equipped on routers simultaneously
Additional function: it can also be used as a USB relay when ESP-01 is pulled out.

Interface and sources:
IN+, IN-: 5V power input
TX, RX: UART communication
SWIM, NRST: MCU program interface
S1: Mode selection key, default is mode 1
S2: Restore key
LED D2 and D4(red): Relay indicator
LED D7(red): Mode 1 indicator
LED D5(blue):  Mode 2 indicator
LED D6(green): Working state indicator, the description of D6 as below:
(1)It means internal self-configuration or lost connection with the router when D6 off
(2)It means the ESP-01 are waiting for the APP configuration the password for it when D6 fast blink every 0.5S
(3)It means the whole configuration is done and waiting for establishing TCP connection with APP when D6 slow blink every 2S
(4) It means the TCP connection between ESP-01 and APP is OK when D6 on all the time.
Relay control command(must be hex format):
Open the first relay: A0 01 01 A2
Close the first Relay: A0 01 00 A1
Open the second relay: A0 02 01 A3
Close the second Relay: A0 02 00 A2

Package Include:
1 x ESP8266 Dual WiFi Relay Module

Interfaces
Interface Type UART
Electrical Parameters
Channels 2 Channel
Output Current 10A
Output Voltage 250Vac , 30VDC
Control Voltage 5V
Physical Parameters
Size 59mm x 40mm

Write a review

Note: HTML is not translated!
   Bad           Good
Captcha
Electronic & Robotic Supplier

Your B2B Supplying Partner in Mainland China

Worldwide Shipping

Using Vast Majority of International Couriers

Secure Payments

Always Pay with Trust by PayPal Express Checkout