ESP-32F WiFi Bluetooth Module

ESP-32F WiFi Bluetooth Module
  • Product Code: SQ8443
  • Availability: In Stock
  • $5.40
  •  
  • Ex Tax: $5.40
This product has a minimum quantity of 2
+
-


Tags: Wifi Module, Bluetooth Module, Bluetooth V4, WiFi BT BLE

Description:   
ESP-32F WiFi Bluetooth Module is a low power multipurpose wireless development board, which is based on the ESP 32F integrated chip. This module integrates 3 wireless communication modules of the Wi-Fi, Bluetooth, and BLE. Also, The ESP 32 F chip integrates ESP32 SoC, flash memory, accurate discrete components, and a PCB/IPEX antenna. This chip is equipped with 2 CPU cores to achieve stand-alone powering on and self-control. It has an internal 80MHz oscillator for auto-calibration and clock frequency that can be programmed from 80 MHz to 240 MHz.
The WiFi module supports FCC, CE, IC, TELEC, KCC, SRRC, and NCC standards with the protocol of the  802.11 b/g/n/d/e/i/k/r (802.11n, speed up to  150 Mbps) and security mechanism of the WPA, WPA2, WPA2-Enterprise, and WPS. The Bluetooth module supports a protocol that compliant with Bluetooth  v4.2 BR/EDR  and  BLE  standards.  The ESP32 board functions at 2.4GHz frequency band, so it is an ISM radio module, suitable for development with a strong 4-layer FCC, CE ( RED ), IC, TELEC, SRRC & KCC-compatible design in a wide operating temperature range of -40°C to 85°C. These module series are an open-source module, that can be fully customized. The ESP32 series is so designed that can be achieved high RF performance in an ultra-low space module, so is suitable for some projects that have space-constrained such as portable and handheld applications. This development board grants the microcontroller and Arduino board functions to communicate with dual-mode wireless of WiFi and Bluetooth. 

Features:
CPU:

Clock Speed: 80MHz ~ 240MHz
ROM: 448KB
SRAM: 520KB
Flash: 16MB (Max)
Input voltage: 2.2V ~ 3.6V
Input Current: 80mA
Data Rate: 150Mbps
Output Power: 22dBm
WiFi Frequency: 2.4GHz ~ 2.5GHz
Interface: SDIO, SPI, UART, I2S, I2
Temperature range: -40°C ~ +85°C
Size: 18 mm x 25.5 mm x 2.8 mm

Clock and timer:
Built-in  8 MHz  oscillator with self-calibration 
Built-in RC oscillator, support self-calibration
Supports external 2 MHz to 40 MHz crystal
Supports external 32 kHz crystal for RTC, supports self-calibration
2 timer groups, each consisting of 2 64-bit general-purpose timers and 1 master system watchdog
An RTC timer with sub-second precision
RTC watchdog

Wi-Fi:
Standard: FCC/CE/IC/TELEC/KCC/SRRC/NCC
Protocol: 802.11 b/g/n/d/e/i/k/r ( 802.11n , speed up to  150 Mbps )
Frequency Range: 2.4 ~ 2.5 GHz
Wi-Fi  mode: Station/softAP/SoftAP+station/P2P
Security Mechanism: WPA/WPA2/WPA2-Enterprise/WPS
Encryption type: AES/RSA/ECC/SHA

Bluetooth:
Protocol: Compliant with Bluetooth  v4.2 BR/EDR  and  BLE  standards
Receiver sensitivity: -98dBm

Package Include:
1 x ESP-32F
1 x Development Board
2 x Pin Headers

Interfaces
Interface Type SDIO , SPI , UART , I2S  ,  I2C 
Wireless Parameters
Data Rate 150Mbps
Receive sensitivity -98dBm (Bluetooth)
Frequency 2.4GHz ~ 2.5GHz (WiFi)
Output Power 22dBm
Electrical Parameters
Input Current 80mA
Input Voltage 2.2V ~ 3.6V
Board Parameters
Clock Speed 80MHz ~ 240MHz
FLASH 16MB (Max)
ROM 448KB
SRAM 520KB
Environmental Conditions and Safety
Operating Temprature -40°C ~ +85°C

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha
Electronic & Robotic Supplier

Your B2B Supplying Partner in Mainland China

Worldwide Shipping

Using Vast Majority of International Couriers

Secure Payments

Always Pay with Trust by PayPal Express Checkout