10 PCS ACS712 5A Current Sensor Module

Description:
ACS712 5A Hall Effect Current Sensor Module is a current sensor based on the ACS712ELC-05 chip current sensor. The Allegro® ACS712 can widely be used in industrial, commercial, and communications systems such as motor control, load detection and management, switched-mode power supplies, and overcurrent fault protection. It is an economical, user-friendly,  high precision tool for AC or DC current sensing. This sensor has a linear Hall sensor circuit with a copper conduction path, which intended current flows through this copper conduction path and makes a magnetic field which is sensed by the Hall circuit and converted into a proportional voltage.
This module is specialized current sensor for the Arduino boards and microcontroller, which senses current flow through  IP+ and IP- pins ( conductor), voltage output on the pin 7 (V_OUT)  of the ACS712, which can directly feed into analog input pin after the filter arrangements. The module can measure positive and negative 5 amp current, corresponding to the analog output 100mV / A. But When no detection current is passed, the output voltage is VCC/2. The sensor can measure positive and negative currents (range -5A…5A), and the power supply is 5V for the sensor, and the middle sensing voltage is 2.5V when no current.

ACS712 current sensor Application:

1. Rectification 
2. Overcurrent fault latch
3. Peak detection circuits
   

ACS712 current sensor Features:

1. Model: ACS712
2. Working Voltage: 5V
3. Color: Blue
4. Material: PCB + metal
5. PCB size: 31mm x 13mm

Document: 

1. ACS712 datasheet Link
2. ACS712 sensor arduino Link

Note: 
ACS712 works based on Hall detection principle, while using avoid it from the magnetic field, its accuracy will be affected.

Package Include:
10 x Current Sensor Module