FT312D USB Android Host Module

Description:
The FT312D is a USB 2.0 Full Speed host IC specifically targeted at providing access to peripheral hardware from an Android platform with a USB device port. The device will bridge the USBport to a UART interface via the Android Open Accessory protocol and has the following advanced 

Features:
Single chip USB to UART interface.
Entire USB protocol handled on the chip. No USB specific firmware programming required.
Supports USB bulk transfer mode
Basic UART interface with RXD, TXD, RTS#, CTS# pins.
TX_ACTIVE signal for controlling transceivers on RS485 interfaces.
UART RX buffer size is 5512 bytes
UART TX buffer size is 256 bytes
USB_ERROR indicator pin
Suitable for use on any Android platform supporting Android Open Accessory Mode (Typically 3.1 onwards, however some platforms may port Open Accessory Mode to version 2.3.4)
12MHz oscillator using external crystal.
Integrated power-on-reset circuit.
+3V3Single Supply Operation with 5V tolerant inputs.
USB 2.0 Full Speed compatible.
Extended operating temperature range; -40⁰C to 85⁰C.

Package Include : 
1x FT312D Module