L298P Motor Driver Shield [2A]

L298P Motor Driver Shield [2A]
  • Product Code:SQ2285
  • Availability: In Stock
  • $3.30
  •  
  • Ex Tax:$3.30
This product has a minimum quantity of 3
+
-


Tags: L298D, Arduino Motor Shield, DC Motor Driver, H Bridge, Stepper Motor Driver

Features:
Logic part input voltage VD: 5V
Drive part input voltage VS: VIN input 6.5~12V, PWRIN input 4.8~35V
Logic part working current Iss: <36mA
Drive part of the operating current Io: <2A
Maximum power dissipation: 25W (T=75°C)
Control signal input level: high level 2.3V<Vin<5V, low level -0.3V<Vin<1.5V
Working temperature: -25+130 °C
Hardware interface: 5.0mm pitch terminal
With fixed buckle, and can access control signals through the array
Drive form: dual high power H-bridge drive
Pin occupation: D4~D7 direct drive motor
Support PWM / PLL mode motor speed control
Size: 68mm x 53mm
 
Spcifcations:
1. board with L298D motor driver chip, the direct use of digital IO port motherboard (D10 .D11. D12. D13), without cumbersome wiring.
2. Onboard buzzer (D4), you can set the backup alarm tone.
3. convenient motor interface, can motor output two routes.
4. The two-way Bluetooth interface, can be directly inserted without wiring.
5 out of the D 2, D 3, D 5, D 6, D 7, D 9, D is not occupied by seven digital interface.
6 out of the A 0 - A 5 six analog interface.
7. both forward and backward turn indicator.
 
Package Include:
1x L298D Shield
Driver Parameters
Input voltage 5V
Power 25W
Drived Current 2A
Drived Voltage 6.5 - 12V
Electrical Parameters
Charge Current 0-4A Max
Physical Parameters
Size 68m x 53mm
Weight 33g

Write a review

Note: HTML is not translated!
   Bad           Good
Captcha
Electronic & Robotic Supplier

Your B2B Supplying Partner in Mainland China

Worldwide Shipping

Using Vast Majority of International Couriers

Secure Payments

Always Pay with Trust by PayPal Express Checkout