10 PCS DC-DC LM2596 5A Buck Converter Module

10 PCS DC-DC LM2596 5A Buck Converter Module
Click image for Gallery
  • Product Code:SQ1521
  • Availability: 998
  • $9.50
  •  
  • Ex Tax:$9.50
+
-


Tags: Buck Converter Module, Step Down Madule, LM2596 Buck Regulator

Description: 
DC-DC LM2596 Step Down buck converter module is a 5A step-down switching regulator with excellent line and load regulation. The LM2596 series of regulators are monolithic integrated circuits, ideally suited for easy and convenient design of a step-down switching regulator (buck converter). These modile is an adjustable output version. These regulators are designed to minimize the number of external components to simplify the power supply design. With the help of high switching frequency, this smps module is optimized to work with a small inductor. That module can be used as a post regulator for AC or DC adaptors and power supplies, battery charger or even a LED current source. With the multiturn potentiometers on the board, you can adjust both the output voltage and current very precisely.

LM2596 DC-DC Buck converter Application:

  1. Battery charges
  2. linear regualation
  3. on-card switching regulators

LM2596 Step-down module Features:

  1. Input voltage: 5V-32V
  2. Output current: Adjustable up to 5A
  3. Output voltage: 0.8V -30V
  4. Switching frequency: 300KHz
  5. Load Regulation: ± 0.5%
  6. Conversion efficiency: 95% (max)
  7. Output ripple: 50mV (maximum) 20M-bandwidth
  8. Voltage Regulation: ± 2.5%
  9. Operating temperature: -40 ℃ to + 85 ℃
  10. Size: 51 mm x  26.3 mm x 14 mm (L × W × H)

Battery charging method:
1. Determine the floating voltage and charging current of the rechargeable battery, it should be relative to the input/output voltage of this module.
2. Adjust the voltage positioner to the desired voltage needed to charge the battery (e.g. 4.2V for a 3.7V Li-Ion Bat Cell). 
3. Use the multimeter 10A current block to measure the output short-circuit current of the module and adjust the current potentiometer to make the output current reach the predetermined charging current value.
4. Connect the battery and try to charge. 

LED constant current driving method:
1. Determine the working current and maximum working voltage of the LED you need to drive (refer to the datasheet or application note of the LED).
2. Adjust the voltage positioner to the output voltage required for the LED. 
3. Use the Multimeter 10A current block to measure the output short-circuit current, and adjust the current potentiometer to make the output current reach the predetermined LED working current.
4. Connect the LED, Test machine. 

Document:

LM2596 datasheet Link

Package Include:
10 x Buck Converter Module

Electrical Parameters
Input Voltage 5V-32V
Operating Voltage 0.8V -30V
Output Current Adjustable up to 5A
Physical Parameters
Size 51mm x  26.3mm x 14mm
Weight 19g

Write a review

Note: HTML is not translated!
   Bad           Good
Captcha
Electronic & Robotic Supplier

Your B2B Supplying Partner in Mainland China

Worldwide Shipping

Using Vast Majority of International Couriers

Secure Payments

Always Pay with Trust by PayPal Express Checkout