20A PWM DC Motor Speed Controller with 9–60V Input and 1200W Capacity

20A PWM DC Motor Speed Controller with 9–60V Input and 1200W Capacity
Click image for Gallery
  • Product Code:SQ2206
  • Availability: 1000
  • $1.99
  •  
  • Ex Tax:$1.99
This product has a minimum quantity of 3
+
-


Tags: PWM controller, 20A motor driver, DC speed regulator, 25kHz PWM, 1200W controller, brush motor driver, pwm dc motor

This 20A PWM motor controller is a high-current speed regulator designed for brushed DC motors and resistive DC loads operating from a 9V to 60V supply. Unlike linear regulators that dissipate excess energy as heat, this DC motor speed regulator uses pulse-width modulation to switch the output on and off at a fixed 25kHz frequency, allowing the average voltage delivered to the motor to be adjusted continuously from 0% to 100% duty cycle. The result is smooth, stepless speed control with high efficiency and minimal power loss. The module is built around a robust output stage capable of handling up to 20A maximum current and 1200W of control power, making it suitable for robotics, autonomous systems, RC models, and industrial speed-control applications. A onboard potentiometer provides direct manual adjustment of the duty cycle, and the compact 85mm × 58mm × 38mm housing fits into control cabinets and project enclosures. The 9–60V input range accommodates common battery packs and power supplies used with 12V, 24V, 36V, and 48V DC motors. For reliable operation, the controller should be mounted with adequate airflow, especially when running continuously near its maximum current rating. This 25kHz PWM controller is a practical choice for makers and engineers who need a straightforward, high-power speed regulator without the complexity of a full H-bridge motor driver.

Application

  1. Speed control for brushed DC motors in robotics
  2. RC model engines and propulsion systems
  3. Industrial fan and pump speed regulation
  4. Autonomous vehicle and robot drive systems
  5. DC motor test benches and laboratory setups
  6. General-purpose DC load dimming and power control

Specifications

  1. Model: 20A-PWM-DCMOTOR
  2. Operating voltage: 9V to 60V DC
  3. Maximum current: 20A
  4. Control power: 1200W (maximum)
  5. Standby current: 0.02A
  6. PWM duty cycle: 0% to 100% (stepless)
  7. PWM frequency: 25kHz
  8. Speed adjustment: potentiometer
  9. Output voltage: linear under load
  10. Efficiency: greater than 90% (per alternative module listing)
  11. Housing material: aluminum alloy (per alternative module listing)
  12. Dimensions: 85mm × 58mm × 38mm

Features

  1. High-current 20A output stage for brushed DC motors
  2. Wide 9–60V input range for 12V, 24V, 36V, and 48V systems
  3. 1200W maximum control power for demanding loads
  4. 25kHz PWM frequency for smooth, stepless speed adjustment
  5. 0–100% duty cycle controlled by an onboard potentiometer
  6. High efficiency with minimal heat generation compared to linear regulators
  7. Compact 85 × 58 × 38mm housing for panel or enclosure mounting
  8. Suitable for robotics, RC models, and industrial speed control
Electrical Parameters
Operating Voltage 9V ~ 60V
Current 20A (Max) , 0.02A (Standby)
Power 1200W (Max)
Board Parameters
PWM Duty Cycle 0% to100% (stepless)
PWM Frequency 25KHz
Physical Parameters
Size 85mm x 58mm x 38mm

Write a review

Note: HTML is not translated!
   Bad           Good
Captcha
Electronic & Robotic Supplier

Your B2B Supplying Partner in Mainland China

Worldwide Shipping

Using Vast Majority of International Couriers

Secure Payments

Always Pay with Trust by PayPal Express Checkout