ACS712 20A Hall Effect Current Sensor Module with Analog Output and 2.1kVRMS Isolation

ACS712 20A Hall Effect Current Sensor Module with Analog Output and 2.1kVRMS Isolation
Click image for Gallery
  • Product Code:SQ7608
  • Availability: 1000
  • $0.59
  •  
  • Ex Tax:$0.59
This product has a minimum quantity of 8
+
-


Tags: ACS712, current sensor, 20A sensor, Hall effect sensor, analog sensor, current module

The ACS712 20A current sensor module is a fully integrated Hall effect-based linear current sensing solution designed for accurate measurement of AC and DC currents in industrial, automotive, and communication systems. Unlike shunt-based sensors that introduce resistive losses, this Hall effect current module uses the magnetic field generated by the current-carrying conductor to produce an isolated analog voltage proportional to the measured current. The module supports a bidirectional measurement range of ±20A and delivers a sensitivity of 100mV/A, with a total output error of 1.5% at 25°C. An 80kHz bandwidth and a 5µs rise time allow the sensor to capture fast current transients, making it suitable for motor control, switching power supplies, and overcurrent protection circuits. The 1.2mΩ internal conductor resistance minimizes power loss and heat generation compared with resistive shunts, while the 2.1kVRMS isolation between the current path and the signal output protects downstream electronics from high-voltage transients. This analog current sensor operates from a single 4.5V to 5.5V supply and draws a maximum of 13mA. The module exposes three pins—VCC, GND, and OUT—so it connects directly to Arduino, ESP32, STM32, or any microcontroller ADC without additional signal conditioning. With an operating temperature range of -40°C to +85°C, this ACS712-20A module is suitable for motor current monitoring, load detection, power management, and bidirectional current sensing in battery charging and discharging systems. Whether you are building a robotic motor controller, a solar charge controller, or an industrial current monitoring panel, this bidirectional current sensor offers a practical combination of isolation, linearity, and ease of integration.

Application

  1. Motor control and overcurrent fault protection
  2. Switching mode power supply (SMPS) current monitoring
  3. Load detection and management in industrial systems
  4. Battery charging and discharging current measurement
  5. Automotive and communication system current sensing
  6. Arduino, ESP32, and STM32 current measurement projects

Specifications

  1. Model: ACS712-20A
  2. Sensor IC: Allegro ACS712ELCTR-20A-T
  3. Measurement range: ±20A (AC and DC)
  4. Sensitivity: 100mV/A
  5. Supply voltage: 4.5V to 5.5V DC
  6. Supply current: 13mA (maximum)
  7. Internal conductor resistance: 1.2mΩ
  8. Bandwidth: 80kHz
  9. Rise time: 5µs
  10. Total output error: 1.5% at 25°C
  11. Isolation voltage: 2.1kVRMS (minimum)
  12. Output type: analog voltage (VCC/2 at zero current)
  13. Pinout: 3-pin (VCC, GND, OUT)
  14. Operating temperature: -40°C to +85°C
  15. Package: SOIC-8 (sensor IC); module with 3-pin header
Sensor Parameters
Measuring range -20A ~ +20A
Output Type Analog
Electrical Parameters
Input Voltage 5V
Board Parameters
Main Chip ACS712ELC-20A
Pin Count 3 Pins
Physical Parameters
Size 27.2mm x 12mm

Write a review

Note: HTML is not translated!
   Bad           Good
Captcha
Electronic & Robotic Supplier

Your B2B Supplying Partner in Mainland China

Worldwide Shipping

Using Vast Majority of International Couriers

Secure Payments

Always Pay with Trust by PayPal Express Checkout