20-tooth XL pulley 6.5 mm shaft

a 3d printer pulley is a type of toothed pulley that is used alongside an xl timing belt. the use of the pulley and xl timing belt reduces slippage and consequently creates uniform movement. pulleys are used for transferring power from one shaft to another. once installed on the motor shaft and secured, this component causes the motor belt to move, and then by adjusting the teeth of the pulley and the belt, these two parts mesh together, ultimately generating the necessary force for displacement. the xl-20 pulley with 20 teeth and its timing belt are used to reduce slippage and create uniform movement of the stepper motor in 3d printers, which leads to increased printing accuracy. the number of teeth on the pulley has a direct relationship with print accuracy; the more teeth there are, the better the print accuracy will be. the use of these aluminum pulleys ensures that the belt moves in a controlled and precise manner. when selecting pulleys, attention should be paid to the number of teeth and the material of the pulley. the xl-20 pulley 6.5 is an aluminum pulley with 20 teeth, suitable for a 6.35 mm shaft.

application of 6.5mm pulley Timing:

1. 3d printer

specifications of the 20-tooth pulley:

1. pitch size: 2 mm
2. number of teeth: 20
3. height: 25 mm
4. outer diameter of pulley: 31.83 mm
5. inner diameter of shaft entry: 5 mm
6. belt seating width: 11 mm
7. material composition: aluminum
8. shaft retaining screws: 2 of type m4