50 PCS 10mm RGB LED [4 Pin]

50 PCS 10mm RGB LED [4 Pin]
  • Product Code:SQ9937
  • Availability: In Stock
  • $4.40
  • Ex Tax:$4.40
This product has a minimum quantity of 2

Tags: RGB LED, 4 Pin RGB, 10mm RGB, LED, Multicolor LED

A diode is an electrical component with two terminals that conduct the electricity only in one direction. With an electrical current, the diode emits a bright light around the small bulb.
RGB LED means red, blue and green LEDs. RGB LED products combine these three colors to produce over 16 million hues of light. Note that not all colors are possible. Some colors are “outside” the triangle formed by the RGB LEDs.
Mixing red, green, and blue sources to produce white light needs electronic circuits to control the blending of the colors. Since LEDs have slightly different emission patterns, the color balance may change depending on the angle of view, even if the RGB sources are in a single package, so RGB diodes are seldom used to produce white lighting. Nonetheless, this method has many applications because of the flexibility of mixing different colors, and in principle, this mechanism also has higher quantum efficiency in producing white light.
You can produce red, green, and blue light, and by configuring the intensity of each LED, you can produce other colors as well.
To produce other colors, you can combine the three colors in different intensities.
In order to adjust the intensity of each LED, you can use a PWM signal.
This is a pack of 50 transparent RGB LED with a diameter of 10mm. This LED has a transparent lens color and gives red, green and blue light where the light intensities can be adjusted separately. This allows all possible combinations to be made in the visible light spectrum. The angle at which the light is emitted is approximately 40°.

Forward Voltage: R:2.2V, G:3.2V, B:3.2V
Diameter: 10mm
Length: 28mm
Light color: RGB (red, green, blue)
Lens Color: Transparent
Light Angle: 40º
Maximum Current: 3 x 20mA (white Color)
Pin Number: 4 Pins

Package Include:
50 x 10mm RGB LED Diode Lights

Component Features
Pin Number 4 Pins
Electrical Parameters
Input Voltage R:2.2V, G:3.2V, B:3.2V
Current 3 x 20mA (white Color)
LED Parameters
Color RGB
LED Size 10mm x 28mm
Viewing Angle 40º

Write a review

Note: HTML is not translated!
   Bad           Good
Electronic & Robotic Supplier

Your B2B Supplying Partner in Mainland China

Worldwide Shipping

Using Vast Majority of International Couriers

Secure Payments

Always Pay with Trust by PayPal Express Checkout