TLC1543 Analog to Digital Converter Module [10 bit]

Description:
The TLC1542C, TLC1542I, TLC1542M, TLC1542Q, TLC1543C, TLC1543I, and TLC1543Q are CMOS10-bit switched-capacitor successive-approximation analog-to-digital converters. These devices have three inputs and a 3-state output [chip select (CS), input-output clock (I/O CLOCK), address input (ADDRESS), and data output (DATA OUT)] that provide a direct 4-wire interface to the serial port of a host processor. These devices allow high-speed data transfers from the host.
In addition to a high-speed A/D converter and versatile control capability, these devices have an on-chip 14-channel multiplexer that can select any one of 11 analog inputs or any one of three internal self-test voltages. The sample-and-hold function is automatic. At the end of A/D conversion, the end-of-conversion (EOC) output goes high to indicate that conversion is complete. The converter incorporated in the devices features differential
high-impedance reference inputs that facilitate ratiometric conversion, scaling and isolation of analog circuitry from logic and supply noise. A switched-capacitor design allows low-error conversion over the full operating free-air temperature range.
This module is an Analog to Digital Converter that providing ADC for the microcontrollers that do not have an internal ADC like Raspberry Pi and many others.

Features:
Chip: TLC1543 
Operating Voltage: 3.3V ~ 5V
Resolution: 10 bit
Channel: 11 channel (AIN0 ~ AIN10)
Samples Rate: 38Ksps
Interface: Serial
It is possible to set a reference voltage with REF+ and REF- pins
Uses just 3 I/O pins of the microcontroller
Size: 43mm x 23mm

Package Include:
1 x TLC1543 10-bit Analog to Digital Converter Module