H3615NS Single Channel DC Motor Driver Board

The Makerbase H-Bridge Motor Controller is a compact and powerful solution for controlling motors. With a small size of only 5.5 x 5.5cm, this controller supports motor voltages ranging from 9V to 36V, with under-voltage protection. It offers a maximum continuous load current of 12A (without heat sink), 15A (with simple heat sink), and 20A (with thick large heat sink). Similar to the L298N drive logic, it enables three-wire control for forward, reverse, and brake functions. The full PWM support allows precise speed control from 0.1% to 100%. With built-in 5V power supply capability, it can power microcontrollers and other controllers. The interface is protected against ESD. Compact yet powerful, this motor controller is perfect for a variety of applications.

H3615NS DC Motor Driver Application:

1. automotive applications
2. industrial motor
3. rotation controller system
4. robots

H3615NS DC Motor Driver Specification:

1. Input Voltage Range: 9～36VDC
2. Maximum long-term Load Current
3. 12A - without heat sink
4. 15A - simple heat sink
5. 20A - thick large heat sink
6. Output Power: 12V (180W); 24V (360W); 36V (540W)
7. Peak Current: 110A
8. 5V Power Supply Output Current (max.): 500mA
9. Control Signal High Level Voltage (VHI): 2～5.5V
10. Control Signal Low Level Voltage (VLI): 0～0.8V
11. Control Signal Current: 50uA
12. PWM Range Supported: 0~100%
13. Support PWM Frequency Range: 0~10kHZ
14. PWM Effective Pulse Width (min.): 200ns
15. Operating Temperature: -25 ~ +85℃
16. Dimensions: 55 x 55 x 1.6mm