10A DC-DC Adjustable Step Down Power Supply Module Constant Voltage Current Dual LCD Display Screen

10A DC-DC Adjustable Step Down Power Supply Module Constant Voltage Current Dual LCD Display Screen
Click image for Gallery
  • Product Code:SQ3602
  • Availability: 1000
  • $8.20
  •  
  • Ex Tax:$8.20
+
-

0 reviews / Write a review

Tags: Voltage reducer, DC-DC converter, regulator module

Description:
DC-DC converter is a converter that converts the DC current of a source from one voltage level to another voltage level and the output voltage can be higher or lower than the input voltage. Buck converter is a step-down DC-DC converter. This converter is used to control the speed of DC motors. The reducing regulator module model XL4016 has dimensions of 80x53x35 mm and is made with excellent construction quality and strong and durable body. This step-down regulator module has an input voltage of 7 to 36 volts and an output voltage of 1.5 to 32 volts and has a maximum output current of 10 amps, but it is recommended to take an output current of 8 amps for better performance of this module.
For better performance of the module, it is recommended to install a fan on it so that the generated heat does not reduce the efficiency and lifespan of the module. The reducing regulator module with a frequency of 300 kHz has a conversion efficiency of up to 95%.
The main difference of this voltage reducer regulator module is the presence of a screen for the amount of voltage and current changes with an accuracy of 0.01 volts and 0.01 amperes on a three-digit screen. It should be noted that this module has the ability to be calibrated to minimize the display error.

Application:
High Voltage Power Conversion
Automotive
Industrial Power
Distributed Power
Battery Powered

Features:
Input Voltage: 7 ~ 36V
Output Voltage: 2 ~ 32V continuously adjustable (can only be used as a buck module, the input must be greater than the output 1V or more)
Output Current: adjustable, maximum 10A ( recommended to use within 8A, 5A or 70W below normal temperature can naturally dissipate heat, please strengthen the heat when it is exceeded! It is recommended to add a small fan! Supporting fan is available in the store! Constant current needs output voltage 2V or more Only adjustable , current regulation, only works in the constant current state. )
Output Power: up to 150W (recommended to use within 100W, please reduce power when using large differential pressure)
Accuracy: 0.01V, 0.01A, three-digit display, current unit is A
Conversion Efficiency: up to 95%
Short Circuit Protection: Yes, constant current value currently set by constant current
Input Reverse Connection Protection: Yes
Output Backflow: NO, (Please add a diode for charging)
Working Temperature: -20 ~ +75 degrees (pay attention to the power tube temperature when using, please strengthen the heat dissipation)
Installation Method: Up and down two acrylic plates, 8 nylon columns, 8 3mm wires, and it is easier to install the buttons in reverse.
Wiring Method: Terminal block or Soldering Terminal, (IN is input, OUT is output)
Module Size: 80 x 53 x 35mm

Voltage calibration:
In the case of power off, press and hold the “set” button, power on, enter the voltage calibration mode, the LCD screen starts to flash, release the set button, press the “set” button for plus, “OK” for minus, calibration For the correct input voltage, for example, the input voltage is 12.65V, then adjust the current voltage to 12.65V, automatically save after 2 seconds, the calibration is completed after the power is turned off!

Write a review

Note: HTML is not translated!
   Bad           Good
Captcha
Electronic & Robotic Supplier

Your B2B Supplying Partner in Mainland China

Worldwide Shipping

Using Vast Majority of International Couriers

Secure Payments

Always Pay with Trust by PayPal Express Checkout