NanoPi NEO Air Board

NanoPi NEO Air Quad Core Cortex A7 WiFi And Bluetooth Board [512MB RAM] is a full computer on a small single-board (smaller than half size of the Raspberry Pi), which consist of CPU, GPU, HDD, RAM, Wi-Fi, Bluetooth, Ports, and also operating systems to be placed in educational robot, copters, toys, etc., to command and control things. FriendlyARM is an open-source computer developer which makes open-source single-board computers with NanoPi brand, for Linux hackers, toymakers, and hobbyists. Such a single-board computer can be run under the Linux based operating system. The NanoPi computers are produced in different model and series of NanoPi 2, NanoPi 2 Fire, NanoPi M1, NanoPi M2, NanoPi M3, NanoPi NEO, nanopiNEO Air, NanoPi NEO core, NanoPi S2, NanoPi fire, Nano Pi Duo, etc.
This computer board is NEO series and based on the Allwinner H3, Quad-core Cortex-A7 Up to 1.2GHz 64-bit support CPU and 512MB DDR3 SDRAM with 8GB eMMC, which is booted and operated on the Linux Based operating system such as u-boot, UbuntuCore, flasher. This series is ultra-low size, simplified, and funny, to control the things easily and simply. This board is supplied by 5V DC with 2A current through the micro-USB port or 2 pins input. It has OTG-USB (data and power in), USB (through the pins of GPIO pins), MIPI video FPC seat (for the camera) as input ports and the pins serial GPIO-UART, SPI, I2C, Audio, etc, and a TFT slot. The NanoPi Neo is equipped with WiFi and Bluetooth V4.0 dual-mode wireless, too. This board is developed for IoT, unmanned vehicles, drones, and intelligent devices.

NanoPi NEO Air Board Application:

1.  IoT
2. unmanned vehicles
3. drones
4. intelligent devices

NanoPi NEO Air Board Features:

1. CPU: Allwinner H3, Quad-core Cortex-A7 Up to 1.2GHz
2. RAM: 512MB DDR3 RAM
3. Storage: 8GB eMMC
4. WiFi: 802.11b/g/n
5. Bluetooth: 4.0 dual-mode
6. DVP Camera: 0.5mm pitch 24 pin FPC seat
7. MicroUSB: OTG and power input
8. MicroSD Slot x 1
9. Debug Serial Port: 4Pin,2.54mm pitch pin header
10. GPIO1: 2.54mm spacing 24pin,It includes UART,SPI,I2C,GPIO
11. GPIO2: 2.54mm spacing 12pin,It includes USBx2,IR,SPDIF,I2S
12. PCB Size: 40 x 40mm
13. PCB layer: 6
14. Power Supply: DC 5V/2A
15. Working Temperature: -20℃ to 70℃
16. OS/Software: u-boot, UbuntuCore, flasher

This computer board is sold alone, but you can prepare its dedicated accessory such as mobile charger, USB to Micro-USB cable, 220 to 5V 2A adapter, NanoPi case.
You can see Nanopi neo air pinout from attached document.

Documents:

1.  Nanopi neo air datasheet pdf 
2. NanoPi NEO air Quick Start Guide Link