Gear DC Motor 3.7V 300rpm

Description:

The exterior of the gear motors has a bracket. The left and right sides of the brackets have a spring. When energized, the stand rotates to the right or left. When it faces the fuselage, it stops and stops. When the power is cut off, the spring force acts and the bracket stops in the center position. If the screw is opened with a micro screwdriver, the bracket may be removed and the output shaft may be exposed.
The output shaft is 3.5*3.5MM. When the device is powered on, the output shaft can be used continuously without being limited by the position of the board.
The test voltage is about 3V-3.7V, and the voltage can be slightly increased, but the motor is relatively easy to heat up.

Mini Geared pager motor Application:

1. tools
2. toys
3. DIY Projects

 Gear Micro DC Motor 3.7V 300rpm Features:

1. Voltage: DC 3 V
    speed: 245 RPM
   Load current: 45 mA
   Stall current: 380 mA
2. Voltage: 3.7 V
   speed: 300 RPM
   Load current: 57 mA
   Stall current: 500 MA
3. Output shaft: 3.5 x 3.5 mm

Document:

1. Mini Worm Gear DC motor itroduction Link
2. Gear DC Motor Link