Raspberry Pi X350 USB Sound Card Shield

Raspberry Pi X350 USB Sound Card Shield
  • Product Code:SQ8837
  • Availability: In Stock
  • $26.40
  • Ex Tax:$26.40

Tags: USB Sound Card, Raspberry Pi Sound Card, Raspberry Pi audio player X350, Raspberry Pi


The Raspberry Pi has an on-board audio jack, which is super handy for all kinds of sound effects and speech, just plug and go! However, for when you want better audio for music playback.
This Raspberry Pi X350 Audio card can improve the sound quality and volume greatly.
The X350 and Raspberry Pi is connected by the USB bridge. X350 does not require an external power supply.
You can DIY an external speaker using the 4pin speaker cable, and control the speaker via the on-board button.
In addition, you can use it on the desktop computer, you only use one USB cable to connect the desktop computer and X350, and insert earphone into the X350, then you can enjoy
the high-quality sound.

It is worth to mention that it's not possible to use both the onboard microphone and an external microphone at the same time, but if you need to use two microphones, you can consider using two X350 audio board to stack on and under your raspberry pi to use it.

X350 Sound Card Application:

  1. Raspberry Pi 1 Model B+
  2. Raspberry Pi 2 Model B 
  3. Raspberry Pi 3 Model B 
  4. Raspberry Pi 3 Model B+

X350 Sound Card Features:

  1. Sample Rate: 48K/44.1KHz
  2. ADC: 16 bit
  3. DAC: 16 bit
  4. Amplifier: Class D
  5. Ideal USB audio solution for Raspberry Pi
  6. 48K/44.1KHz Sampling Rate for both Playback and Recording
  7. On-board high-sensitivity Electret Condenser Microphones
  8. Supports 16 bit ADC input with Microphone Boost
  9. High-Performance 16-bit audio DAC with Earphone Phone Buffer
  10. On-board 3.5mm headphone jack and microphone input jack
  11. On-board buttons for speaker volume control and microphone mute
  12. On-board LED Indicators for Record Mute Status, Playback, and power
  13. Compatible with Raspbian without Additional Driver
  14. On-board stereo Class-D audio amplifier with high SNR
  15. 2x3W output at 10% THD with a 4Ω Load
  16. 2.4W Output at 1% THD with a 4Ω Load
  17. 32-Step Up/Down Volume Control from -80dB to 24dB
  18. Superior Low Noise 60uV and Minimize Pop/Clip Noise
  19. On-board XH2.54 connector for speaker output, power input, and speaker mute GPIO control
  20. USB bus-powered - does not require an external power supply

Raspberry Pi USB sound card Items:

  1. 1 x X350 Board
  2. 1 x 4PIN Speaker Cable (about 30cm length)
  3. 1 x USB Connector
  4. 1 x Installation Screw Pack

Package Include:
1 x X350 Board
1 x 4PIN Speaker Cable (about 30cm length)
1 x USB Connector
1 x Installation Screw Pack

Audio Module Features
Class Type Class D
Electrical Parameters
Sample rate 48K/44.1KHz
Board Parameters
ADC 16 bit
DAC 16 bit

Write a review

Note: HTML is not translated!
   Bad           Good
Electronic & Robotic Supplier

Your B2B Supplying Partner in Mainland China

Worldwide Shipping

Using Vast Majority of International Couriers

Secure Payments

Always Pay with Trust by PayPal Express Checkout